Partings

分别

So, what’s a parting? A parting is nothing more than a border at which hair lies in opposing directions. Ok, so all you first need to do is plant two guides that point in opposite directions, right? Well, yes, but … hair will also be interpolated between these two guides as well, and no clear line of separation will be visible.

那么，分别是什么？分头只不过是毛发朝相反的方向分开的边界而已。好的，所以你首先要做的就是植入两个指向相反方向的导管，对吗？嗯，是的，但是... 毛发也会被插入到这两个向导之间，并且没有清晰的分界线。

This is where Partitions comes in.

这就是分区的用武之地。

Auto Partings

汽车零件

Activate Auto Partings if partings should be rendered automatically based on the Distance and Angle settings.

激活自动分别，如果分别应该自动渲染的距离和角度设置为基础。

Distance[0..+∞m]

距离[0. . + ∞ m ]

This is the maximum distance two guides can have from one another if hair should be interpolated between them. If the guides are farther apart than the Distance setting, a clear line of separation will be created – the hair parting. If the Angle setting should not play a role, set its value very high.

如果要在两个导游之间插入毛发，这是它们之间的最大距离。如果导游距离远于距离设置，一条清晰的分离线将被创建——毛发分开。如果角度设置不应该发挥作用，设置它的值非常高。

Angle[0..+∞°]

角度[0. . + ∞ ° ]

This is the maximum difference in angle the guide root segments can have for hair to still be interpolated between them. If the actual difference in angle between these two guides is greater, no hair will be interpolated between them. If the Distance setting should not play a role, set its value very high.

这是指导根段之间的最大角度差异，毛发仍然可以插入他们之间。如果这两个导轨之间的实际角度差异更大，则不会在它们之间插入任何毛发。如果距离设置不应该起作用，请将其值设置得非常高。

Groups

团体

Groups that have been assigned a Hair Selection tag using Set Selection can be placed into this field.

使用 Set Selection 分配了 Hair Selection 标签的组可以放置到这个字段中。

Hair will only be interpolated between guides within the same Selection tag. Partings can be created manually using this method.

毛发只会在同一个选择标签内的指南之间插入。可以使用这种方法手动创建分别。