Dynamics Body Tag 动力身体标签Basic 基础Dynamics 动力学Collision 碰撞Mass 弥撒Force 警队Soft Body 柔软的身体Cache 缓存

Mass

弥撒

Tip: 提示:
 Note that a trick (this trick runs internally, which makes using it easier) can be used through which mass will have no real effect on the spring’s oscillation (exception: the mass will play a role for objects linked to springs and not lying on a surface). If you want to change the rate of oscillation, use the 请注意，一个技巧(这个技巧在内部运行，使得使用起来更加容易)可以用来使质量不会对弹簧的振动产生真正的影响(例外: 质量对与弹簧相连的物体起作用，而不是躺在弹簧表面上)。如果要改变振荡速率，请使用Stiffness 僵硬 setting to do so. 设置为这样做

Use

使用

Use this setting if you want to define a mass that is independent of the mass of the dynamic object.

如果你想定义一个独立于动态物体质量的质量，使用这个设置。

World Density

世界密度

The Density value in the Preference menu will be applied. The default Density value of 1 is programmed to assign a mass of 1 to a cube with a length of 100.

选项菜单中的密度值将被应用。默认的密度值1被设定为给长度为100的立方体分配质量为1的质量。

Custom Density

自定义密度

Density[0..+∞]

密度[0. . + ∞]

Define the desired density.

定义期望的密度。

Custom Mass

定制弥撒

Mass[0..+∞]

质量[0. . + ∞]

Use this value if you want to define a mass that is independent of the volume of the dynamic object.

如果要定义一个独立于动态物体体积的质量，请使用此值。

Rotational Mass[1..10000%]

旋转质量[1. . 10000% ]

The mass/density settings described above only affect linear movement and collisions. The Rotational Mass value on the other hand only affects the force required to rotate a clone. Very high values often result in clones barely being able to be rotated. Very low values allow objects to be rotated by the slightest collision..

上面描述的质量/密度设置只影响线性运动和碰撞。另一方面，旋转质量值只影响旋转克隆体所需的力。非常高的值常常导致克隆几乎不能旋转。非常低的值允许物体被最轻微的碰撞旋转。.

A value of 100% will simulate an object whose mass is evenly distributed.

一个100% 的值将模拟质量均匀分布的物体。

Custom Center
Center[XYZ m]

自定义中心[ XYZ m ]

At left the center of mass was calculated automatically at the actual center of mass; at right the nail’s head was moved upward and the tip of the nail moved accordingly (gravity pulls at the 在左侧的重心是自动计算在实际的重心，在右侧的钉子的头部是向上移动和钉子的尖端移动相应(重力拉在Custom Center 定制中心).

By default (option disabled) the center of mass will automatically be calculated and all dynamic objects will behave realistically. If you want to define the center of mass manually, enable this option and enter the coordinates (with regard to the object’s coordinate system) accordingly.

默认情况下(选项禁用)的质量中心将自动计算和所有动态对象将行为逼真。如果你想手动定义重心，启用这个选项并相应地输入坐标(关于物体的坐标系)。

The center of mass is also the point at which restricted force fields start to affect clones/objects. If the center of mass lies outside of this field, no effect will take place.

质心也是限制力场开始影响克隆/物体的点。如果质心位于磁场之外，则不会产生影响。