Mabel Shader 梅布尔着色器Basic 基础VeiningDiffuse A 漫反射 aSpecular 1 A 镜面1 aSpecular 2 A 镜面2 aSpecular 3 A 镜面3 aReflection A 反射 aEnvironment A 环境 aAmbient A 环境 aRoughness A 粗糙度 aAnisotropy A 各向异性 aDiffuse B 扩散 bSpecular 1 B 镜面1 bSpecular 2 B 镜面2 bSpecular 3 B 镜面3 bReflection B 反射 bEnvironment B 环境 bAmbient B 环境 bRoughness B 粗糙度 bAnisotropy B 各向异性 bIllumination 照明Assign 分配
Reflection B
反射 b
The reflection you set here is added to the surface color.
您在这里设置的反射是添加到表面颜色。
强度[0. . 1000% ]
Scales the Reflection Color before it is mixed with the Edge Intensity and Reflection Edge Color result to create the final reflection color sample that will be used to attenuate the reflection sample taken by Cinema 4D internally. Appropriate values are 0% - 200%.
缩放反射色之前，它是混合的边缘强度和反射边缘颜色的结果，以创建最终的反射色样本，将用于削弱反射样本的 Cinema 4D 内部。适当的值为0%-200% 。
边缘强度[0. . 1000% ]
Scales the Reflection Edge Color before it is mixed with the Intensity and Reflection Color result to create the final reflection color sample that will be used to attenuate the reflection sample taken by Cinema 4D internally. Appropriate values are 0% - 200%.
缩放反射边缘颜色之前，与强度和反射颜色的结果混合，创建最终的反射颜色样本，将用于削弱反射样本的 Cinema 4D 内部。适当的值为0%-200% 。
衰退[0. . + ∞% ]
Mixes the results of the Reflection Color * Intensity and Reflection Edge Color * Edge Intensity. Smaller values provide for more Reflection Color, while larger values provide more Reflection Edge Color. The appropriate range is 0% - 500%.
混合反射颜色 * 强度和反射边缘颜色 * 边缘强度的结果。较小的值提供更多的反射颜色，而较大的值提供更多的反射边缘颜色。适当的范围是0%-500% 。
反射色
The controls in this group of parameters define the base color used to attenuate the reflection sample in tandem with the reflection Intensity parameter. Utilizes the Falloff parameter to mix with Reflection Edge Color.
这组参数中的控件定义了用于衰减反射样品的基本颜色以及反射强度参数。利用 Falloff 参数与反射边缘颜色混合。
反射边缘颜色
The controls in this group of parameters define the edge color used to attenuate the reflection sample in tandem with the reflection Edge Intensity parameter. Utilizes the Falloff parameter to mix with Reflection Color.
这组参数中的控件定义了用于衰减反射采样的边缘颜色，并与反射边缘强度参数配合使用。利用 Falloff 参数与反射颜色混合。