Polygon Selections

多边形选择

It would be practical if materials can be assigned separately to the shell, caps surfaces and bevel surfaces. This can be done in one of two ways:

这将是实际的，如果材质可以分配到外壳，帽表面和斜面。这可以通过以下两种方式之一来实现:

• You can either enable the respective option in the Polygon Selections menu, which will create a Polygon Selection tag. This tag can then, for example, be placed in the Texture tag’s 您可以在多边形选择菜单中启用相应的选项，这将创建一个多边形选择标记。例如，这个标签可以被放置在纹理标签中Selection 选择 field. 字段
• Alternatively you can enter the respective abbreviation - which is shown at the right of the selection list - in the Texture tag, for example. 或者你也可以在纹理标签中输入相应的缩写(显示在选择列表的右侧)

This will restrict the material to the selected region(s).

这将限制材质到选定的区域。

The Generator tags that are created (these will be marked accordingly on the icon) cannot be deleted directly or copied but can be dragged into the respective fields. When the generator is converted, all Selection tags will be created.

创建的 Generator 标记(将在图标上相应标记)不能直接删除或复制，但可以拖放到相应的字段中。生成器转换后，将创建所有 Selection 标记。

Edge selections (as a tag or abbreviation) can, for example, be used in the Bevel Deformer (Selection). These edges may be beveled again separately.

例如，边缘选择(作为标记或缩写)可以在斜面变形(选择)中使用。这些边可以再次单独切削。

Shell

壳牌

The shell is made up of the object surfaces without bevel or caps surfaces.

外壳由物体表面组成，没有斜面或帽子表面。

Start Cap
End Cap

启动 CapEnd 盖

The caps surfaces are made up of the flat end surfaces.

瓶盖表面由平整的端面组成。

For these and the following settings, Start and End values will be applied. Caps/bevel surfaces can be created at the beginning and/or end of the object generated by the splines. This is why the following settings have Start and End values, e.g., so they can be assigned separate materials.

对于这些和以下设置，将应用 Start 和 End 值。帽子/斜面可以创建在开始和/或结束的对象生成的样条。这就是为什么下面的设置有开始和结束值，例如，这样它们可以被分配独立的材质。

Start Bevel
End Bevel

开始斜角斜角

Bevel surfaces are surfaces that make up the transition between the shell and the caps surfaces. If there is no bevel (Size=0) no surfaces will be created.

斜面是组成壳体和帽子表面之间过渡的表面。如果没有斜面(Size = 0) ，则不会创建任何表面。

Start Shell
End Shell

启动 ShellEnd Shell

These edge selections are made up of the edges between the shell and the bevel surfaces.

这些边缘选择是由外壳和斜面之间的边缘组成的。

Start Cap
End Cap

启动 CapEnd 盖

These edge selections are made up of the edges between the bevel surfaces and the caps surfaces.

这些边缘选择是由锥面和帽子表面之间的边缘组成的。

Start Step
End Step

开始步骤/结束步骤

These two options are only available if Bevel Shape is set to Step. The following edges will then be saved separately as Edge Selection tags for the Start and End Caps:

这两个选项只有在 Bevel Shape 设置为步骤时才可用。下面的边缘将分别保存为开始和结束大写的边缘选择标签: