Path/Loop Cut

路径/回路切割

Path/Loop Cut

路径/回路切割

The Loop/Path Cut tool is primarily used to more finely subdivide edge loops interactively. An automatic loop recognition (Mode = Loop) or a manually created loop selection (Mode = Path) can be used.

环路/路径切割工具主要用于交互式地细分边缘环路。可以使用自动循环识别(Mode = Loop)或手动创建的循环选择(Mode = Path)。

The Loop/Path Cut tool cuts polygon objects in all three component modes (Use Point, Use Edge, Use Polygon).

循环/路径裁剪刀具在所有三种组件模式(使用点，使用边，使用多边形)中切割多边形对象。

Use

使用

The Loop mode will be used to describe the tool’s function (other modes will be explained elsewhere).

循环模式将用于描述工具的功能(其他模式将在其他地方解释)。

1. First, move the cursor over the selected object’s mesh. The loop recognition will suggest a loop that lies perpendicular to and in the vicinity of a given edge. 首先，将光标移动到选定对象的网格上。循环识别将显示一个垂直于给定边缘并且在给定边缘附近的循环
   
2. Click to cut the suggested loop. The cut is not yet final! 点击切断建议的循环。切断还没有结束
   
3. The orange loop can now be adjusted in different ways (or duplicated): 橙色循环现在可以通过不同的方式进行调整(或复制) :
   
   
   • Interactively with the mouse 与鼠标交互
     
   • Via the HUD element 通过 HUD 元素
     
   • Using modifiable settings in the Attribute Manager 在属性管理器中使用可修改设置
     

The edge cut will remain visible - and adjustable - in all views until you switch tools or press the Esc key. This will complete the cut.

边缘切割将保持可见-和可调-在所有的意见，直到您切换工具或按 Esc 键。这样就完成了切割。

HUD element

显示器元件

As soon as a loop cut is defined - i.e., an edge was clicked on - the HUD element will be activated. The slider symbolizes the length of the edge that was clicked on, which is marked by a green line and point in the Viewport. The green reference point (if you want to set the reference point to the opposite edge, try clicking on another edge of the ring loop) represents the left side of the slider, i.e., the start of the edge.

一旦一个循环切割被定义-即，一个边缘被点击-HUD 元素将被激活。滑块象征着单击的边缘的长度，它由绿色直线和 Viewport 中的点标记。绿色的参考点(如果你想把参考点设置为相反的边缘，试着点击环圈的另一边缘)代表滑块的左侧，也就是边缘的开始。

The spacing for the loop cuts can be easily defined here. The small triangular handles on the slider each represent one loop cut. They can be selected either in the Viewport or on the slider by clicking on them. Their spacing will be displayed accordingly (100% = total edge length). Double-clicking on the value will let you enter this value manually. The selected handle can be moved. Drag the handle out of the slider to delete the corresponding loop cut.

循环切割的间距可以很容易地在这里定义。滑块上的小三角形把手每个代表一个循环切割。它们可以在视窗中选择，也可以通过点击滑块来选择。它们的间距将相应地显示(100% = 总边长)。双击该值可以手动输入该值。可以移动选定的句柄。将手柄拖出滑块，删除相应的环切。

The slider’s length can be adjusted by clicking and dragging the dark tip at the left or right end. The slider itself can be clicked and dragged to a different position.

滑块的长度可以通过点击和拖动在左端或右端的暗端来调整。滑块本身可以单击并拖动到不同的位置。

At the right of the slider are three icons. These are from left to right: create a uniform loop spacing; add a loop cut; delete a loop cut.

滑块的右边是三个图标。这些是从左到右: 创建一个均匀的循环间距; 添加一个循环切换; 删除一个循环切换。

The following hotkeys can be used for the HUD element:

下面的热键可以用于 HUD 元素:

• Ctrl/Cmd +click on the slider: Creates a new loop cut + 点击滑块: 创建一个新的循环切割
• Ctrl/Cmd +move a handle: Duplicates the corresponding loop cut 移动手柄: 复制相应的环形切口
• Shift 转移 +move a handle: Snaps the handle to the fixed spacing (defined in the + 移动句柄: 将句柄对准固定间距(定义在Quantize Step 量化步骤 setting) 下载)

Viewport

As soon as a cut has been selected and the cut edge has been colored orange it can be moved freely parallel in the Viewport.

一旦切口被选中，切口边缘被涂成橙色，它就可以在 Viewport 自由平行移动。

The following hotkeys are available:

下列热键可用:

• Ctrl/Cmd : Duplicates the loop cut : 重复循环切割
• Shift 转移 : The loop cut will snap to the fixed spacing defined by the : 循环切割将与Quantize Step 量化步骤 setting 设置
• MMB 甲基溴化铵 : Changes the cut count : 更改削减计数
• Ctrl/Cmd +Shift 转移 keys when creating the 1st loop cut (hold mouse button pressed and drag left/right): The loop cut’s length can be modified (note also the 当创建第一个循环剪切(按住鼠标按钮并向左/右拖动) : 循环剪切的长度可以修改(还要注意Bidirectional Cut 双向切割 option in conjunction with this). 方案)

If you want to apply this function to multiple cuts, this can be done using the Number of Cuts, Use Loop Range and Range settings in the Attribute Manager.

如果您想将此函数应用于多个切割，可以使用属性管理器中的切割数、使用循环范围和范围设置来完成。