SculptBrush Smooth Tool 光滑工具Settings 设置 Falloff 女名女子名 Stamp 邮票 Symmetry 对称性 Stencil 模板 Modifiers 力场

Symmetry

对称性

Axis

轴心

Use this setting to define the coordinate system that will be used as a basis for the Symmetry function’s mirror planes (as well as the following three options). The following coordinate systems can be used:

使用这个设置来定义坐标系，它将作为对称函数的镜像平面的基础(以及以下3个选项)。可以使用下列坐标系统:

World 世界: World coordinate system 世界坐标系
Local 本地: Object coordinate system 对象/坐标系
Workplane 工作平面: Coordinate system defined by the Workplane 工作平面定义的坐标系

X (YZ)
Y (XZ)
Z (XY)

X (YZ) y (XZ) z (XY)

Use this setting to define on which axis the mirror plane should be placed vertically. For elements that are not rotated, for example, this would be X. The mirror plane is displayed in parenthesis.

使用此设置可定义镜面应垂直放置在哪个轴上。例如，对于没有旋转的元素，这将是 x。圆括号中显示镜面。

Radial

径向

The brush strokes pictured here, for example, can be created using radial symmetric mirroring. The radial symmetrical center point can be positioned freely (see next option). 例如，这里的画笔笔触可以通过径向对称镜像来创建。径向对称中心点可以自由定位(见下一选项)

Enable this option to create radial symmetrical effects, e.g., those requiring rotational angles, spatial repetition, etc. The brush stroke will then be duplicated around a defined axis, depending on the settings chosen. In the preview window below you will see a preview of the radial effect, which gives you an idea how the brush will behave when applied.

使用此选项可以创建径向对称效果，例如，需要旋转角度、空间重复等。然后，根据所选择的设置，画笔笔触将围绕一个确定的轴进行复制。在下面的预览窗口中，你将看到放射状效果的预览，这将告诉你画笔在应用时的行为。

Radial Symmetry Mode

径向对称模式

XY
YZ
ZX

Xyyzx

When in this mode, a circular dispersion of the brush’s effect on the Layer will occur. The radius that will be used is the distance between the cursor at the start of the brush stroke and the object’s center point. As long as the cursor hovers over the Sculpt object (without clicking!) the radial symmetry positions will be displayed in the preview. If the cursor enters regions in which the brush stroke would lie outside of the Sculpt object due to the brush’s radius, the object’s center point (marked in the image above) will be displayed (Attention: The object axis cannot be moved of a Sculpt tag has already been applied!).

当在这种模式下，一个圆形的分散刷的影响层将发生。将要使用的半径是画笔笔触开始时光标与对象中心点之间的距离。只要光标停留在 Sculpt 对象上(无需单击!)径向对称位置将显示在预览中。如果光标进入由于画笔半径的原因而画笔笔触位于 Sculpt 对象外部的区域，那么将显示对象的中心点(见上图)(注意: Sculpt 标签已经被应用，对象轴不能移动!).

Point

重点

When in this mode, the brush stroke will be duplicated radially (star-shaped) around the starting point of the brush stroke.

在这种模式下，笔触会在笔触起始点周围径向复制(星形)。

At the bottom of the menu settings is a preview window in which you can see approximately where and how the brush stroke will be applied.

在菜单设置的底部是一个预览窗口，你可以看到画笔笔触的大致应用位置和方式。

Edge Detect
Angle[1..90°]

边缘探测器[1. . 90 ° ]

The Pinch brush, for example, spares the edge vertices when the 例如，Pinch 画笔避免了边缘顶点Edge Detect 边缘检测 option (at right) is enabled. This option is disabled at the center. 选项(右)启用。此选项在中心处禁用

Occasionally it would be practical if a brush’s effect would end at an object’s edges. This is exactly what these setting does. If enabled, the brush will constantly compare the surface Normals that lie with in its radius of operation with those at the brush’s center. If the angle deviation is greater than the value defined in the Angle setting, the brush will not affect those regions. To put it differently, the smaller the Angle value the larger the angle deviations have to be for the brush to affect a region.

有时，如果画笔的效果在物体的边缘结束，这将是实用的。这正是这些设置所做的。如果启用，画笔将不断地比较表面法线在其运作半径与那些在画笔的中心。如果角度偏差大于在角度设置中定义的值，则画笔不会影响这些区域。换句话说，角度值越小，画笔影响区域的角度偏差就越大。

The edge recognition is very abrupt, which can lead to rugged edges on high-resolution objects. These must then be subsequently smoothed.

边缘识别是非常突然的，这可能导致高分辨率物体的崎岖边缘。然后，这些问题必须得到解决。

The edge recognition works very well in conjunction with masking (see also Invert).

边缘识别工作非常好结合掩蔽(也见逆相)。

Another use would be the selection of flat surfaces using the Select brush (with a very small Angle value).

另一个用途是选择平面使用选择笔刷(具有非常小的角度值)。

Number of Radial Strokes[2..2147483647]

径向行程数[2.2147483647]

Use this setting to define the number of brush strokes that can be applied simultaneously.

使用此设置可定义可同时应用的笔触数。

With a higher value, rotationally symmetrical, intertwining shapes can be created:

具有更高的值，旋转对称，相互缠绕的形状可以创建:

Radial Gap Angle[0..90°]

径向间隙角[0. . 90 ° ]

Using this setting, gaps can be added to the otherwise evenly dispersed radially symmetrical brush strokes if a value greater than 0° is entered. Brush stroke groups (each with Number of Radial Strokes) will be created according to the following scheme: If, for example, 45° is defined, the brush stroke group will be spread evenly over 45°, followed by a 45° gap, followed by brush strokes spread evenly over 45° and so on.

使用此设置，如果输入大于0 ° 的值，可以将间隙添加到其他均匀分散的径向对称笔触上。根据以下方案创建笔画组(每组都有径向笔画数目) : 例如，如果定义了45 ° ，则笔画组将均匀分布在45 ° 上，然后是45 ° 间隙，最后是均匀分布在45 ° 上的笔画，依此类推。