Stencil

模板

Stencil Preset
Load
Save
Clear

模板预装载保存清除

These buttons can be used if you want to archive Stencils with individual settings for later use. Your Stencils (as well as all other Cinema 4D presets) will be saved to a library in your user directory under Maxon/Version/library/browser/user.lib4d.

如果您希望将具有单独设置的模板存档以供以后使用，可以使用这些按钮。您的模板(以及所有其他C4D 预设)将保存到您的用户目录下的 Maxon/Version/library/browser/user 库中。自由女神。

In the Content Browser you will find the presets (to download, delete, etc.) in the Presets/user/Sculpt Stencils Preset directory.

在内容浏览器中，您将在 Preset/user/sculpt Stencils 预置目录中找到预置(用于下载、删除等)。

• Load 装载: Loads a Stencil preset from a list of available preset. Note that only Stencil presets can be listed here that are located in : 从可用预设列表中加载模板预设。注意，只有模具预设可以在这里列出位于user.lib4d 4d, sculpting.lib4d 雕刻 lib4d or 或sculpt_X.lib4d 4D (whereby, X’ can be an directory). (据此，x’可以是一个目录)

• Save 保存: The current Stencil settings are saved as a preset in the library. : 当前模具设置保存为库中的预设置

• Reset 重置: Resets the Stencil to its default settings. : 将模具重置为其默认设置

Use Stencil

使用模板

Enables or disables the Stencil function.

启用或禁用 Stencil 函数。

Visible

可见的

Toggles the stencil’s visibility (the Q key can also be used).

切换模具的可见性(q 键也可以使用)。

Hide During Stroke

中风时隐藏

If this option is enabled, the stencil will be hidden as soon as the mouse button is pressed, i.e., the brush will be active.

如果启用此选项，鼠标按钮一按，模具就会隐藏起来，也就是说，画笔将处于活动状态。

Image

图片

Load the bitmap on which the Stencil function should be based here (white=min. effect; black=max. effect). In the Content Browser under Presets/Sculpting/Stencils you will find numerous stamps you can use (simply drag your selection into the Image field).

加载 Stencil 函数应该基于的位图(white = min)。黑色 = 最大。影响)。在内容浏览器下的预置/雕刻/模板，你会发现许多邮票，你可以使用(只需拖动您的选择到图像字段)。

You can use either bitmaps with gray scales OR bitmaps with alpha channels - mixing the two is not possible.

您可以使用带有灰度的位图，也可以使用带有阿尔法通道的位图——两者不能混合使用。

Transparency[0..1]

透明度[0. . 1]

Defines the transparency with which the stencil bitmap will be displayed in the Viewport. The bitmap will be hidden automatically when sculpting (mouse button pressed).

定义在 Viewport 中显示模具位图的透明度。位图将在雕刻时自动隐藏(鼠标按钮按下)。

Angle[0..360°]

角度[0.360 ° ]

Use this setting to define the orientation of the Stencil in the Viewport. This can also be done interactively by pressing T + middle mouse button.

使用此设置在 Viewport 定义模具的方向。这也可以通过按下 t + 鼠标中键交互完成。

Scale[0.01..100]

比例[0.01. . 100]

Use this setting to scale the Stencil in the Viewport. This can also be done interactively be pressing T + right mouse button.

使用此设置可缩放 Viewport 中的模具。这也可以做交互式按下 t + 鼠标右键。

Translate[XYZ ]

翻译[ XYZ ]

Use this setting to change the position of the Stencil in the Viewport. This can also be done interactively by pressing T + left mouse button.

使用此设置更改模板在 Viewport 的位置。这也可以通过按 t + 鼠标左键交互完成。

Tile X
Tile Y

Tilextiley

Use these settings to tile the Stencil horizontally (Tile X) or vertically (Tile Y).

使用这些设置可以水平平铺模具(平铺 x)或垂直平铺 y。

Flip X
Flip Y

翻转 XFlip y

Use these settings to mirror the Stencil horizontally (Flip X) or vertically (Flip Y).

使用这些设置可以水平(Flip x)或垂直(Flip y)镜像模具。

Gray Value[0..1]

灰度值[0. . 1]

Whereas the Grab brush, for example, raises (bitmap region lighter than Gray Value) or lowers (bitmap region darker than Gray Value) the mesh, the Gray Value defines the null level at which nothing happens. If Gray Value is set to 0, black regions will remain unaffected by the brush, brighter values will cause the corresponding regions to be raised.

例如，当 Grab 画笔提高(比 Gray 值亮的位图区域)或者降低(比 Gray 值暗的位图区域)网格时，Gray 值定义了空级别，在这个级别上什么也没有发生。如果灰度值设置为0，黑色区域将不受画笔的影响，较亮的值将导致相应的区域被提高。

See also Gray Value for more information.

有关更多信息，请参见 Gray Value。