Camera
Object 相机对象Basic 基础Coord.Object 对象Physical 身体上的Details 详情Stereoscopic 立体感Composition 构图Spherical 球形的
Details
详情
Enable Near Clipping
Near Clipping[0..+∞m]
启用接近 ClippingNear Clipping [0. . + ∞ m ]
Far Clipping camera setting.>
远裁剪相机设置。 >
Enable Far Clipping
Far Clipping[0..+∞m]
启用 Far ClippingFar 裁剪[0. . + ∞ m ]
Top center 顶部中心Near
Clipping 近裁剪; top right 右上角Far Clipping 远程剪辑.
This setting defines cutting planes that lie perpendicular to the angle of view of the camera, in front of which (near clipping) or behind which (far clipping) rendered objects will be cut off. This is ideal for cutting objects. Note, however, that these objects will remain closed for the renderer with most effects. Shadow casting light sources cannot illuminate the interior of such objects.
这个设置定义了垂直于相机视角的切割平面，在其前面(近裁剪)或后面(远裁剪)渲染的对象将被切断。这是理想的切割对象。但是请注意，对于效果最好的渲染器，这些对象将保持关闭状态。阴影投射光源不能照亮这些物体的内部。
When applying Far Clipping, the 
Background
当应用远裁剪时，背景可以用来避免渲染场景背后被切断的区域默认为黑色的对象。
Use the clipping values to define the distances from the camera to the given cut plane.
使用剪切值来定义从摄像机到给定切割平面的距离。
Tip: 提示:
The cut planes can be used to remove incorrectly depicted parts of images, as shown in the example above.
切割平面可以用来删除不正确描述的部分图像，如上面的例子所示。
展示锥
Enables or disables the camera view cone in the Viewport.
在 Viewport 启用或禁用摄像头视锥。
DOF Map Front Blur
Start[0..+∞m]
End[0..+∞m]
DOF Map Rear Blur
Start[0..+∞m]
End[0..+∞m]
自由度地图前轮模型开始[0. . + ∞ m ]结束[0. . + ∞ m ]自由度地图后轮模糊开始[0. . + ∞ m ]结束[0. . + ∞ m ]
These settings can be used for two purposes:
这些设置可以用于两个目的:
- When rendering the 当渲染Depth 深度 Multi-Pass channel, the normal linear grayscale gradient can be fine-tuned. You can, for example, define, that it begins at a specified depth. 多通信道，正常线性灰度梯度可以微调。例如，您可以定义它从指定的深度开始
- To define the physically incorrect 定义物理不正确的Depth of Field 景深, which is described below (When using the Physical Renderer that calculates a physically correct depth of field using the camera settings ，这是描述如下(当使用物理渲染器，计算物理正确的景深使用相机设置F-Stop (f/#) F/stop (f/#), Focus Distance 对焦距离, etc. these parameters only serve to calculate the Multi-Pass’, depth’. Hence, the following description only applies to the standard renderer). 等，这些参数只用于计算多通道’ ，深度’。因此，下面的描述只适用于标准渲染器)
Use the Depth of Field value to define which part of an images should be in focus and which out of focus. Either the rear region (DOF rear) or the front region (DOF front) can be blurred. Correspondingly, objects in the foreground or background, respectively, will be blurred. You can also focus on the center region of a scene. In this case both the foreground and the background will be blurred. If neither of the options is enabled, the camera will behave as before: all objects will be in focus.
使用景深值来定义图像的哪一部分应该聚焦，哪一部分不聚焦。无论是后方区域(自由度后方)或前方区域(自由度前方)可以模糊。相应地，前景或背景中的物体将分别模糊。你也可以把焦点放在场景的中心区域。在这种情况下，前景和背景都会变得模糊。如果两个选项都没有启用，照相机将会像以前一样工作: 所有的对象都会聚焦。
Tip: 提示:Note that the 请注意Start 开始 and 及End 完 settings for depth of field will only have an effect if the 设置景深将只有在下列情况下才会产生效果:Use Gradients 使用渐变option is enabled in the Depth of Field menu. 选项在“景深”菜单中启用