Path Selection 路径选择Options 选择Selection Tag Functions 选择标记函数
Options
选择
选择模式
简单边缘循环
This tool is the same as Loop Selection except it selects elements that form a broad ring-shape.
此工具与循环选择相同，只是它选择的元素形成了一个宽广的环形。
活路
Draw a selection border by moving from point to
point. 通过从一个点移动到另一个点来绘制选择边界
A selection is made by moving from point to point with the mouse button pressed. The selection will be highlighted when made. Selected edges can be deselected by moving back over the active edge line. As soon as you release the mouse button the selection will be made.
选择是通过按下鼠标按钮从一个点移动到另一个点来完成的。选择将突出显示时作出。选定的边缘可以通过移回到活动边缘线来取消选择。只要您释放鼠标按钮，选择将被做出。
适线路径
If this mode is selected, a line will be displayed between the first selected object point and a second point. The edge selection will be made along the edges that most accurately represent the straightest line between the two points. Click to select the second point once the line runs along the desired path.
如果选择此模式，则在第一个选定的对象点和第二个点之间将显示一条线。边缘选择将沿着最准确地表示两点之间最直线的边缘进行。单击此处可在线路沿所需路径运行时选择第二个点。
自由通道
Such selections are good when editing 3D UV meshes
in BodyPaint 3D. 在 BodyPaint 3D 中编辑3D UV 网格时，这样的选择是很好的
An edge selection between two points will be made. Slightly bent edge paths can also be used. Click on the first point and move to the next. The next available edge that can be selected will be highlighted. Click on the next edge to select it.
将在两个点之间进行边缘选择。也可以使用边缘略微弯曲的路径。点击第一个点，然后移动到下一个点。将突出显示可选的下一个可用边缘。点击下一个边缘来选择它。