Cloud 云Tools 工具Smoothing 平滑Display 展示
Smoothing
平滑
This tab’s settings cannot be changed interactively and are only available if either the 此选项卡的设置不能交互式地更改，只有在Smooth Borders 平滑的边界 or 或Smooth All 一切顺利 buttons have been clicked. 按钮被点击了平滑边界
After having painted a cloud, its density is consistently even. This is not as realistic as it could be and may result in visible artefacting at the cloud’s edges. In fact, the cloud’s density should fade at its edges, and this is exactly what Smooth Borders does.
在画了一朵云之后，它的密度始终是均匀的。这是不现实的，因为它可以，并可能导致可见的人工制品在云的边缘。事实上，云的密度应该在它的边缘消失，而这正是 Smooth Borders 所做的。
In the image below, Quality (Display tab) was set to 100%, which ensures that every cloud density point is displayed. This can be seen best in the editor.
在下面的图像中，Quality (Display 选项卡)被设置为100% ，这确保显示每个云密度点。这可以在编辑器中看到。
Top: A newly painted cloud; bottom: The same cloud
after several clicks on 上图: 新画的云彩; 下图: 点击几下之后，同样的云彩Smooth Borders 平滑的边界.
距离[0. . + ∞ m ]
Defines the distance – according to the Shape graph’s settings – that the transparency of the density points will be affected, starting from the edge of the cloud outwards.
定义距离-根据形状图的设置-密度点的透明度将受到影响，从云的边缘向外开始。
方差[0. . 100% ]
Randomly varies the Distance value.
随机改变距离值。
形状
Edit the graph to define the transparency of the cloud’s edge.
编辑图表以定义云的边缘的透明度。
平滑的边界
As soon as you click on this button, the cloud’s edges will be made transparent, as described above. This effect increases with each click of the mouse.
只要你点击这个按钮，云的边缘就会变得透明，如上所述。这种效果随着鼠标的每一次点击而增加。
平滑整个云
The following settings affect the entire cloud, not only its edges; density points may also be added. Smoothing makes clouds more fluffy, more cotton-like, as in the example below:
下面的设置不仅影响云的边缘，还可以添加密度点。平滑使云层更蓬松，更像棉花，如下图所示:
At top: A newly painted cloud. At bottom: The same
cloud after clicking on 上图: 一朵新画的云。底部: 点击后同样的云Smooth All 一切顺利 several times. 好几次
力量[0. . 100% ]
Sets the strength (increases each time the button is clicked) with which smoothing should be applied to the selected cloud.
设置应该对选定的云应用平滑处理的强度(每次单击按钮时增加)。
方差[0. . 100% ]
Sets the degree of irregularity with which Smoothing is applied.
设置平滑应用的不规则程度。
一切顺利
Clicking this button will smooth the entire cloud in accordance with the two aforementioned settings. Click this button several times to increase its effect.
点击这个按钮将平滑整个云根据上述两个设置。点击这个按钮几次，以增加其效果。
Use parameter Remap Spline function graph to help redefine the cloud density dispersion. The curve shown above will cause cloud densities of 0% and 100% to be set to 0% and densities of 50% to be set to the maximum.
使用参数重新映射样条函数图来帮助重新定义云密度散布。上面显示的曲线将导致0% 和100% 的云密度设置为0% ，50% 的云密度设置为最大值。
The setting will take effect once the Remap Spline button has been pressed.
此设置将在重新映射样条按钮被按下后生效。
If clouds have been smoothed too much, use the Remap function graph to undo this command. Remap can also be used to achieve other interesting effects:
如果云被过度平滑，使用 Remap 函数图来撤消这个命令。重新映射还可以用来实现其他有趣的效果:
Various 各种各样的Remap 重新映射
functions were applied to the cloud in the center. 函数被应用到中心的云上