Tag Properties

标签属性

Collisions

碰撞

Use this setting to determine if the splines should be checked for collision with other objects containing a Hair Collision tag.

使用此设置确定是否应检查样条是否与包含 Hair Collision 标记的其他对象碰撞。

Rigid

刚性

Activate this setting to stiffen the springs connecting the mass points. The spline will try to maintain its shape without simply falling/collapsing, as it would if this option were not active. The splines will sway at or near their initial state, depending on rigidity.

激活这个设置，使连接质量点的弹簧变硬。样条函数将尝试保持其形状而不会简单地下降/折叠，就像如果此选项不激活时所做的那样。根据刚度的不同，这些花键会在其初始状态或附近摇摆。

Set Initial

设置初始值

Use this setting to define a starting point for the spline dynamics effect. This setting can also be used if, for example, the splines have fallen as a result of dynamics and you want to save the resulting state.

使用此设置定义样条动态效果的起点。例如，如果样条因为动态而下降，并且希望保存结果状态，也可以使用此设置。