Object Properties

对象属性

Width[0..+∞m]
Height[0..+∞m]

宽[0. . + ∞ m ]高[0. . + ∞ m ]

These settings define the width and height of the flat surface. If the recipient is larger than the flat surface, it will wrap onto and beyond the cyan curved surface. If the recipient is smaller than the flat surface, it will wrap on to and within the curved surface (it will not cover the entire curved surface). To change the transform area interactively, drag the orange handles on the X axis and Y axis.

这些设置定义了平面的宽度和高度。如果接受者大于平面，它将包裹在青色曲面之上和之外。如果接受者小于平面，它将包裹在曲面上和曲面内(它不会覆盖整个曲面)。若要交互地更改变换区域，请拖动 x 轴和 y 轴上的橙色手柄。

Radius[0..+∞m]

半径[0. . + ∞ m ]

This value defines the radius of the cylinder or sphere (see below) around which the recipient is wrapped.

这个值定义了包裹收件人的圆柱体或球体的半径(见下文)。

Wrap

包装

Determines whether the recipient is wrapped around a sphere or a cylinder.

确定收件人是环绕球体还是圆柱体。

Spherical

球形的

Cylindrical

圆柱形

Longitude Start[-∞..+∞°]
Longitude End[-∞..+∞°]

经度开始[-∞ . . + ∞ ° ]经度结束[-∞ . . + ∞ ° ]

These angles define the horizontal span of the curved surface. If Start is set to 180° and End to 360°, the curved surface forms half of the cylinder or sphere in the horizontal direction.

这些角定义了曲面的水平跨度。如果开始角设置为180 ° ，结束角设置为360 ° ，则曲面在水平方向上形成圆柱体或球体的一半。

Latitude Start[-90..90°]
Latitude End[-90..90°]

起始纬度[-90. . 90 ° ]终止纬度[-90. . 90 ° ]

These angles define the vertical span of the spherical surface. If Start is set to -45° and End to 45°, the curved surface forms the middle half of the sphere in the vertical direction.

这些角定义了球面的垂直跨度。如果开始角设置为 -45 ° ，结束角设置为45 ° ，则曲面在垂直方向上形成球体的中半部。

Movement[-∞..+∞m]

动作[-∞ . . + ∞ m ]

You can use this value to specify a movement in the Y direction. This causes the object to wrap in a spiral fashion. You can use a positive value to spiral up or a negative value to spiral down.

可以使用此值指定 y 方向的移动。这使得物体呈螺旋状包裹起来。你可以用一个正值螺旋上升，或者用一个负值螺旋下降。

Scale Z[0..10000%]

标度 z [0. . 10000% ]

Use this value to simulate the flattening that usually happens when a real-life flexible object is stretched. If you enter 50% instead of 100%, the object will be flattened by 50% in the Z direction. You can enter values greater than 100% if you would like the object to expand on wrapping.

使用这个值来模拟现实生活中柔性物体被拉伸时通常发生的扁平化现象。如果你输入50% 而不是100% ，对象将在 z 方向被展平50% 。如果希望对象在环绕时展开，则可以输入大于100% 的值。

Tension[0..100%]

紧张[0. . 100% ]

This setting enables you to define the strength of the wrap effect. You can set values from 0% to 100%. You can animate the Tension to animate the wrap deformation. To wrap the object completely, set Tension for the first key to 0% and Tension for the second key to 100%. To reverse the wrap effect, swap the keys around.

此设置使您能够定义包装效果的强度。您可以将值从0% 设置为100% 。您可以动画的紧张局势，以动画包装变形。要完全包装对象，请将第一个键的张力设置为0% ，将第二个键的张力设置为100% 。要逆转这种环绕效果，可以互换按键。

Fit to Parent

适合父母

This might be the best thing since sliced bread. A simple click on this button will adjust the size of the Deformer object to the Parent object to be deformed (i.e. to its bounding box). The object will be enclosed entirely and deformed as a whole. This means that the Deformer’s size must no longer be tediously adjusted manually (click here for additional information).

这可能是自切片面包以来最好的事情了。点击这个按钮可以将变形物体的大小调整为要变形的父物体(即它的边界框)。这个物体会被完全包围起来，变成一个整体。这意味着变形者的尺寸不再需要手动进行繁琐的调整(点击这里获得更多信息)。

Furthermore, Deformer objects’ axes will be fitted to the axes of the nearest Parent object, i.e., you rotate the Deformer object interactively in the direction in which its effect should be exerted, click on the Fit to Parent button and the Deformer object will snap to the nearest axis (it will simultaneously assume this as its origin).

此外，变形物体的轴线将被安装到最近的父物体的轴线上，也就是说，你以交互方式旋转变形物体到其效果应该被施加的方向，点击适合父物体按钮，变形物体将与最近的轴线对齐(它将同时假定这是它的原点)。

For some Deformer objects (e.g., Squash & Stretch), only the origin or other useful parameters will be fitted to the Parent object, depending on the function selected.

对于一些 Deformer 对象(例如，Squash & Stretch) ，根据所选择的函数，只有原点或其他有用的参数将适合于父对象。