Display

展示

The Field Force’s directional vectors can be made visible in the Viewport.

野战部队的方向矢量在 Viewport 可以看得见。

Display Box

展示盒

If this option is enabled, the directional vectors will be displayed within the scalable bounding box described below.

如果启用此选项，方向向量将显示在下面描述的可伸缩边界框中。

Box Size[XYZ m]

盒子尺寸[ XYZ m ]

Use these settings to define the size of the bounding box.

使用这些设置来定义边界框的大小。

Line Density[1..100%]

线密度[1. . 100% ]

Use this setting to define the number of directional vectors (indirectly via their density) within the box.

使用此设置定义箱内方向向量的数量(通过它们的密度间接地)。

Display Vector Length

显示矢量长度

Enable this option if the vector lengths should be displayed as a measure for the strenght of the force (how exactly is explained in the next option). If this option is disabled, all vectors that are displayed will have the same length and only show the direction of the strength.

如果向量长度应显示为力量强度的度量值，则启用此选项(在下一个选项中将如何解释)。如果禁用此选项，则所有显示的向量将具有相同的长度，并且只显示强度的方向。

Length As

长度为

Here you can define how the force strength should be displayed:

在这里你可以定义力量应该如何显示:

• Line Length 行长: The greater the force, the longer the lines and vice-versa : 力越大，线越长，反之亦然
• Brightness 亮度: The greater the force, the brighter the lines and vice-versa : 力越大，线条越明亮，反之亦然

Scale Displayed Length[0.001..+∞]

缩放显示长度[0.001. . + ∞]

If Length As is set to Line Length, the length displayed can be lengthended (values >1) or shortened (values <1) proportionally to the value defined here. This will not affect the way the force unfolds.

如果将 Length As 设置为 Line Length，则显示的长度可以根据此处定义的值进行延长(值 > 1)或缩短(值 < 1)。这不会影响力量展开的方式。