Step
第一步
Basic 基础Coord.Effector 效果器Parameter 参数Deformer 分离器Falloff 女名女子名
Step
第一步
Tip:
提示:
Note also the 还要注意Step Field 步骤领域, which works similarly within the Field functionality.
，它在 Field 功能中的工作方式类似
The Step Effector works like this: Each defined transformation is applied to the last clone, and the
transformation of the clones in between (i.e. clone 0 to the last clone) is
interpolated.
步骤效果器的工作原理是这样的: 每个定义的转换都应用到最后一个克隆上，并在两个克隆之间进行转换(即克隆0到最后一个克隆)。
The Step Effector with 步进效果器S.Y 女名女子名 set to 开始10; the last clone is 10 times larger in the
Y-direction than the first clone. 最后一个克隆在 y 方向上比第一个克隆大10倍
The following applies to the numbering of clones:
下列规定适用于克隆体的编号:
- Clone mode (Grid) 克隆模式(网格): When looking at the grid in the Z-direction: The first
clone is at the bottom left. The sequence is basically as follows: 1st row at bottom front from left to right,
2nd row at bottom front from left to right, etc., then from front to rear. : 查看 z 方向的网格: 第一个克隆位于左下角。这个顺序基本上是这样的: 第一排在前面的底部从左到右，第二排在前面的底部从左到右，等等，然后从前面到后面
- Polygon objects / splines 多边形对象/样条: If cloning takes place on polygonal objects or splines, the
first clone is always the one that is on the first object point or spline point. 如果在多边形物体或样条上进行克隆，第一个克隆始终是位于第一个物体点或样条点上的克隆
- Particles 粒子: The first clone will be on the first generated
particle. : 第一个克隆将在第一个生成的粒子上
- MoInstance object MoInstance 对象: The first clone is the one directly
behind the animated instanced object. : 第一个克隆是直接在动画实例对象后面的克隆