Squash and Stretch 压缩和伸展Basic 基础Coord.Object 对象
Object Properties
对象属性
Top [0. . + ∞ m ]
Use this setting to define the upper range limit of the effect. This value will always lie along Squash and Stretch Deformer’s positive Y axis.
使用此设置可定义效果的上限。这个值总是沿着 Squash 和 Stretch Deformer 的正 y 轴方向。
[-100. . 100% ]
If this value is set to 0% the center of the effect will lie exactly between the effect’s Top and Bottom limits. The effect’s center can be adjusted, in terms of percent, to a positive or negative range using the slider.
如果这个值设置为0% ，那么效果的中心将恰好位于效果的顶部和底部极限之间。效果的中心可以调整，以百分比，以正或负的范围使用滑块。
底部[-∞ . . 0 m ]
Use this setting to define the lower range limit of the effect. This value will always lie along the Squash and Stretch Deformer’s negative Y axis.
使用此设置可定义效果的下限范围。这个值将始终沿着 Squash 和 Stretch Deformer 的负 y 轴。
方面[-∞ . . + ∞% ]
Use this slider to adjust the strength of the effect along the X and Y-axes. If set to 100%, the effect’s strength will be spread equally in both directions. If the value is reduced the strength of the effect will decrease correspondingly accordingly along the Z axis.
使用这个滑块可以沿 x 轴和 y 轴调整效果的强度。如果设置为100% ，效果的强度将在两个方向平均分布。如果这个值减小，这个效果的强度将相应地沿着 z 轴减小。
因子[0. . + ∞% ]
Use this setting to define the strength of the effect.
使用此设置来定义效果的强度。
展开[0. . + ∞% ]
Use this setting to adjust the strength of the effect with respect to its center. The greater the value, the more a deformed object will narrow when stretched and the more it will widen when squashed.
使用此设置来调整效果相对于其中心的强度。值越大，变形物体拉伸时变窄的程度越大，挤压时变宽的程度越大。
Smooth Start[0..100%]
Smooth End[0..100%]
顺利开始[0. . 100% ]顺利结束[0. . 100% ]
Use this setting to define how soft the distortion towards the top and bottom will be. Greater values will result in a more spherical shape towards the top and bottom of the deformed object. Lesser values will result in peaked ends.
使用这个设置来定义如何软失真的顶部和底部将。更大的数值将导致变形物体的顶部和底部呈现更为球形的形状。较小的值将导致峰值结束。
曲率[0. . 100% ]
This setting gives you additional control over the effect along the Deformer’s Y axis. The greater the value, the more dominant the ends will be and the narrower the center will be when stretched.
这个设置给你额外的控制效果沿着变形者的 y 轴。值越大，两端就越占主导地位，拉伸时中心就越窄。
类型
Select the mathematical function to be used for deformation.
选择用于变形的数学函数。
习俗
If this option is selected you can define the strength of the squash and stretch calculation via the Power setting.
如果选择此选项，可以通过 Power 设置定义压缩和拉伸计算的强度。
花键
If this option is selected you can create a profile for the deformation using the spline curve.
如果选择此选项，则可以使用样条曲线创建变形配置文件。
动力[0. . + ∞]
If Custom is selected in the Type menu you can manually define the strength for the squash and stretch calculation.
如果在“类型”菜单中选择“自定义” ，则可以手动定义压缩和拉伸计算的强度。
曲线
Use this spline to create your own profile for the deformation. Profile must be selected in the Type menu.
使用此样条可以创建自己的变形配置文件。必须在“类型”菜单中选择配置文件。
适合父母
Clicking on this button will set the Deformer to the Parent object’s origin (see also here).
单击这个按钮将把 Deformer 设置为父对象的原点(也见这里)。