Parameter

参数

• Index[-2147483648..2147483647]

索引[-2147483648. . 2147483647]

Feed the index number of the clone-generating object into this port. Internally, all clones are numbered sequentially - beginning with 0. An individual index value can also be defined for an active Node in the Attribute Manager.

将克隆生成对象的索引号提供给此端口。在内部，所有克隆都按顺序编号——从0开始。还可以为属性管理器中的活动节点定义单个索引值。

MoText Object clones can only be read out on the letter plane .

MoText 对象的克隆只能在字母平面上读出。

• Object

•物体

Connect the Object output port of the clone-generating object whose properties should be read out to this input port. The following clone-generating objects can be used:

连接克隆生成对象的 Object 输出端口，该对象的属性应读出到此输入端口。可以使用以下克隆生成对象:

• Clone Object 复制对象

• Matrix Object 矩阵对象

• Fracture Object 骨折物体

• MoInstance Object MoInstance 对象

• MoText Object 对象

Output Ports

输出端口

Many of these output ports can be connected to the input ports of the same name on the Effector Nodes (see below).

许多这些输出端口可以连接到 Effector Nodes 上同名的输入端口(见下文)。

Count[-2147483648..2147483647]•

计数[-2147483648. . 2147483647]•

The number of clones of the clone-generating object.

克隆生成对象的克隆数。

Local Matrix•

本地矩阵‧

This port reads out the individual clone matrix. A local matrix refers to the object that lies above it in the hierarchy, i.e., if the Cloner Object is moved, normally the global matrix will be modified, not the local matrix.

这个端口读出单个克隆矩阵。局部矩阵指的是位于它之上的层次结构中的对象，也就是说，如果 Cloner 对象被移动，通常会修改全局矩阵，而不是局部矩阵。

Global Matrix•

全球矩阵•

See Local Matrix.

参见本地矩阵。

Position[XYZ ]•

位置[ XYZ ]•

This port reads individual clone positions out as vectors, taking into account any Effectors.

该端口将个体克隆位置作为矢量读出，同时考虑到任何效果器。

Scale[XYZ ]•

刻度[ XYZ ]•

This port reads out the scale value as a vector.

此端口将缩放比例值作为向量读出。

Rotation[XYZ ]•

旋转[ XYZ ]•

This port reads out each clone angle as a vector.

这个端口读出每个克隆角作为一个矢量。

Color•

颜色•

This port reads out a clone’s color, as defined in the clone-generating object and by any Effectors affecting that object.

这个端口读取克隆的颜色，如同克隆生成对象和影响该对象的任何效果器所定义的那样。

UV[XYZ ]•

UV [ XYZ ]•

This port reads out the clones’ UVW-coordinates that run in the direction of one of the three dimensions, respectively, from 0 to 1. These UVW readouts are important with regard to the Effectors. For example, the U, V or W value(s) can be used as variables in a formula defined for the Formula Effector.

这个端口读出克隆的 uvw 坐标，这些坐标分别沿三个维度之一的方向从0到1。这些 UVW 读数对于效果器是重要的。例如，u、 v 或 w 值可以用作公式效果器定义的公式中的变量。

Visibility

能见度

This port contains the visibility property as a boolean value of 0 or 1. The visibility of clones can be spread across clones randomly by using the Random Effector, for example.

此端口包含一个布尔值0或1的可见性属性。例如，克隆的可见性可以通过使用随机效果器在克隆之间随机传播。

Weight[-∞..+∞]

权重[-∞ . . + ∞]

This port reads out the weighting for each clone.

此端口读出每个克隆的权重。