Layer Controls

图层控制

Mode

模式

First off: You will almost always use Maximum mode.

首先: 你几乎总是使用最大模式。

Imagine a typical Field effect: a Field (e.g., Spherical Field) moves over a clone/object point and causes an increase and decrease of its effect values. If Maximum is selected, the increase will take place unchanged and only the decrease will be delayed. If Minimum is selected, the effect will be inverted - the increase will be delayed and the decrease will take place unchanged.

想象一个典型的场效果: 一个场(例如，球形场)移动到一个克隆/对象点上，并导致其效果值的增加和减少。如果选择最大值，增加将不变地发生，只有减少将被延迟。如果选择最小值，效果将被反转——增加将被延迟，减少将不变地发生。

Effect Strength[0..100%]

效果强度[0. . 100% ]

Define a value of 100% if no decay effect should take place, i.e., the maximum value is maintained. You can, for example, use it to "paint" because the respective value is maintained (see image here with an Effect Strength of 100%)

如果没有发生衰变，则定义100% 的值，即保持最大值。例如，您可以使用它来“绘制” ，因为维护了相应的值(参见图片，效果强度为100%)

The decay effect will lessen in strength with decreasing values. A value of 0 will disable the effect.

衰变效果会随着强度的减小而减弱。值为0时会使效果失效。