UV Pins

紫外线针

Add UV Pins

添加紫外线针

This command will define the currently selected points as UV Pins. If UV Pins already exist, the new ones will be added.

这个命令将定义当前选择的点为 UV 引脚。如果紫外线针已经存在，新的将被添加。

Use this command if you want to fix a point selection in UV space. This fixation can be applied where the UV mesh is relaxed (e.g., in conjunction with the Pin Point Selection option in the UV Manager’s Relax UV menu or the UV Unwrap... command.

如果你想修复 UV 空间中的点选择，使用这个命令。这种固定可以应用在紫外线网放松的地方(例如，结合紫外线管理器的放松紫外线菜单或紫外线展开... 命令中的 Pin Point Selection 选项)。

Note that, depending on the tool used together with the UV Pins, only parts of the algorithm will be fixed or the Pins can move (e.g., in conjunction with UV Weld and Relax...).

注意，根据与 UV 引脚一起使用的工具，只有部分算法是固定的或引脚可以移动(例如，与 UV Weld 和 Relax...)。

Remove UV Pins

移除紫外线针

If you want to delete specific Pins, select the respective points and call up the Remove Pin Selection command. This selection will then be removed from the UV Pin selection.

如果要删除特定的引脚，请选择相应的点并调用“删除引脚选择”命令。然后这个选择将从 UV 引脚选择被删除。

Clear UV Pins

透明紫外线针

This command deletes all Pins.

此命令删除所有的引脚。