Sculpt Brush Flatten Tool

压平工具

Settings 设置Falloff 女名女子名Stamp 邮票Symmetry 对称性Stencil 模板Modifiers 力场

Sculpt Brush Flatten Tool

压平工具

Flattened regions can be created with the help of the 属性的帮助下可以创建扁平区域Fixed Plane 固定飞机 option or by clicking on the surface multiple times with a larger 选项，或通过点击表面多次较大的Strength 力量 value (inserts: effect of brush strokes). 值(插入: 画笔笔触的效果)

Use the Flatten brush to flatten regions of your mesh. An average surface value below the brush is calculated based on the Normals and all corresponding vertices will be set to this value.

使用压平笔刷压平网格的区域。根据法线计算画笔下面的平均曲面值，并将所有相应的顶点设置为此值。

An overview of all available brushes can be found here: Brushes.

所有可用的笔刷的概述可以在这里找到: 笔刷。

Link Size / Link Pressure / Link Symmetry

链接尺寸/链接压力/链接对称

If one of the first three options is enabled, the value will be applied to all Sculpt brushes (even if you use a preset). Example: You set the Wax brush’s Size value to 15 and you switch to the Erase brush. This brush will also have a Size value of 15 if the Link Size option is enabled.

如果前三个选项中的一个被启用，这个值将被应用到所有的 Sculpt 笔刷(即使你使用预设)。例如: 你将蜡笔刷的尺寸设置为15，然后切换到 Erase 笔刷。如果启用了链接大小选项，这个笔刷的尺寸值也将为15。

Back

回来

If this option is enabled you will also be able to sculpt on the back side of a polygon (the cursor color will change to blue). The direction of the brush’s effect will remain unchanged for most brushes (the Pull brush, for example, will still pull in the direction of the surface Normals). The exceptions are the Scrape and Fill brushes.

如果启用此选项，您还可以在多边形的背面雕刻(光标颜色将改为蓝色)。对于大多数笔刷来说，笔刷效果的方向将保持不变(例如，拉动笔刷仍将沿着表面法线的方向拉动)。例外的是刮和填充笔刷。

Keep Visual Size

保持视觉尺寸

If this option is enabled, the brush size will change accordingly when the Viewport is zoomed in or out to keep the visual size relative to the screen. If this option is disabled, the brush stroke will always have the same diameter no matter what the Viewport’s zoom factor is.

如果启用此选项，当 Viewport 放大或缩小以保持相对于屏幕的视觉大小时，画笔大小将相应地改变。如果禁用此选项，则无论 Viewport 的缩放因子是什么，画笔笔触的直径将始终相同。

Preview Mode

预览模式

Here you can define how the brush preview should be displayed around the cursor:

这里你可以定义画笔预览应该如何在光标周围显示:

• Off 关掉: No preview will be displayed : 不会显示预览
• Screen 屏幕: The preview will always be displayed perpendicular to the camera : 预览将始终显示与相机垂直
• On Surface 表面上: The preview will show in the direction of the average Normal (those beneath the brush’s diameter. This makes it easier to see the direction in which the brush will sculpt (in most cases along the Normal average). : 预览将显示在平均法线方向(刷子直径以下的方向)。这使它更容易看到的方向，笔刷将造型(在大多数情况下沿正常的平均值)