Layer Controls

图层控制

Source

资料来源

Here you can select either the Value or Color Field channel, which will then be used as the source. Peaks and depths will be colored using the source colors.

这里您可以选择 Value 或 Color Field 通道，然后将其用作源。峰值和深度将使用源颜色着色。

Mode

模式

Different Color Filter settings. 不同的滤色器设置

Two modes are available:

有两种模式可供选择:

Monochrome: A single-color gradient whose 单色: 单色渐变Base Color 基色 can be defined will be created. If the Base Color is set to 将被创建。如果基色设置为Black 黑色, a grayscale gradient will be created. ，将创建一个灰度梯度
Duotone: The depths will be replaced by the 双色调: 深度将被深度所取代Base Color 基色 and the peaks will be given the 峰值将被赋予Top Color 顶部颜色.

Base Color

基色

If Mode is set to Monochrome, the color will be a gradient color, if Duotone is selected, the color will be the color that is applied to the depths.

如果模式设置为单色，则颜色为渐变颜色，如果双色调被选择，则颜色为应用于深度的颜色。

Base Density[0..+∞%]

基本密度[0. . + ∞% ]

For Monochrome, you can use this setting to adjust the saturation; for Duotone, you can use this setting to adjust the color that is applied to the depths.

对于单色调，你可以使用这个设置来调整饱和度; 对于双色调，你可以使用这个设置来调整深度的颜色。

Top Color

顶部颜色

This color is applied to the peaks.

这种颜色适用于峰值。

Top Density[-∞..100%]

最高密度[-∞ . . 100% ]

Use this setting to adjust the strength of the peaks’ coloring.

使用此设置来调整峰值着色的强度。

Ink Types

墨水类型

This is a mix mode that mixes the Base Color with the Top Color and emulates the methods used in printing. Pigment (Opaque) produces a more opaque effect over the Base Color, and Dye (Translucent) lets the Base Color shine through. For effects such as poster printing, the Pigment (Opaque) setting should be used.

这是一种混合模式，它将基色与顶色混合，并模拟打印中使用的方法。颜料(不透明)在基色上产生更不透明的效果，染料(半透明)让基色透过。对于海报印刷等效果，应使用颜料(不透明)设置。

Value as Alpha

值为 Alpha

Enable this option if the layer output should be made up of an alpha and not a color.

如果图层输出应由 alpha 而不是颜色组成，则启用此选项。