Tag Properties

标签属性

Regular Pulse

有规律的脉搏

If this option is enabled, the object pulsates using a regular pattern shaped like a sine wave.

如果启用此选项，则对象使用正弦波形状的规则模式脉动。

Relative

亲属

If this option is enabled the vibration will take place around the local object axis. This means that the object can be animated normally and the vibration will take place in addition to the animation. This makes earlier workarounds using an additional Null Object obsolete.

如果启用此选项，振动将围绕本地对象轴发生。这意味着对象可以正常动画和振动将发生除了动画。这使得使用额外的空对象的早期解决方案不再有效。

Seed[-∞..+∞]

Seed [-∞ . . + ∞]

This parameter is available only when Regular Pulse is disabled. It controls the starting position of random vibration. Two objects that are set to the same Seed value will pulsate synchronously. If you want to prevent this, ensure that the objects use different Seed values.

此参数仅在禁用“常规脉冲”时可用。它控制随机振动的起动位置。设置为相同 Seed 值的两个对象将同步跳动。如果要防止这种情况，请确保对象使用不同的 Seed 值。

Enable Position
Amplitude[XYZ m]
Frequency[0..+∞]
Enable Scale
Uniform Scale
Amplitude[XYZ ]
Frequency[0..+∞]
Enable Rotation
Amplitude[HPB °]
Frequency[0..+∞]

使能定位振幅[ XYZ m ]频率[0. . + ∞]使能刻度均匀振幅[ XYZ ]频率[0. . + ∞]使能旋转振幅[ HPB ° ]频率[0. . + ∞]

Use these options to switch vibration on or off for position, scale or rotation. The Amplitude input boxes control the maximum positive and negative movement, scale or rotation along the X, Y and Z axes. The Frequency value controls the speed of vibration. The Uniform Scale option determines whether all axes are scaled uniformly.

使用这些选项开关振动或关闭的位置，规模或旋转。振幅输入框控制沿 x，y 和 z 轴的最大正向和负向移动，缩放或旋转。频率值控制振动的速度。统一缩放比例选项确定所有轴是否均匀缩放。