Options

选择

Mode

模式

Use this option to define how precise the cuts will be:

使用这个选项来定义削减的精确度:

• Cut All 全部切断: A single cut point along an edge or an edge on a polygon will be created where cut lines cut edges and polygons : 沿着一条边或多边形的一条边创建一个切割点，在这里切割线切割边和多边形
• Split 分裂: 2 identical but disconnected points will be created at along the cut edges, which will split the mesh. If multiple cuts are defined, separate slices will be created. : 2相同但不连续的点将创建沿切割边缘，这将分裂的网格。如果定义了多个切口，将创建单独的切片
• Remove Part A/B 拆除甲部/乙部: One of the cut halves (behind the last cut plane) will be removed. Since it is not possible to accurately define which half will be removed, repeat the function with the alternative option if the wrong half was removed the first time (reversing the point order for the cut line will have the same effect). Make sure that the : 切开的一半(在最后一个切面后面)将被移除。由于不可能准确地定义哪一半将被删除，如果第一次删除了错误的一半，则使用替代选项重复函数(反转切割线的点顺序将具有相同的效果)。确保Cut Polygon 切割多边形 option is enabled. 选项启用

Plane Mode

平面模式

Free

免费

This works as described on the Introduction page.

这项工作如导言页所述。

Local
World
Camera

本地世界摄像机

These modes were assumed directly from the old (prior to R18) Knife tool’s Plane mode. White cut planes that can be moved with the mouse are used that are oriented to a certain coordinate system (Local = object coordinate system; World = world coordinate system; Camera = camera coordinate system). The cut planes along the coordinate system are defined using the following Plane setting.

这些模式是直接假定从旧的(之前的 R18)刀具的平面模式。可以用鼠标移动的白色切面被用来定向到某个坐标系(Local = object 坐标系; World = World 坐标系; Camera = Camera 坐标系)。沿着坐标系的切割平面使用下面的平面设置来定义。

There is no manipulator for these modes as is the case with the Plane ModeFree.

没有为这些模式的情况下是飞机模型免费机械手。

The layer cuts will be made here via mouse click.

图层切割将通过鼠标点击在这里。

Plane

飞机

Use this setting to define the coordinate system to which the cut layers should lie parallel.

使用这个设置来定义切割层应该平行的坐标系。

Plane Position[XYZ m]
Plane Rotation[HPB °]

平面位置[ XYZ 米]平面旋转[ HPB ° ]

When interactively creating cut planes, the plane position and rotation (and therewith also the manipulator) are entered into the world coordinates. If you want to enter these manually, you can do this at any time. At the far right you will find a drop-down menu whose settings let you rotate the cut plane parallel to a specific plane in the world coordinate system. For example, +X will rotate the cut plane perpendicular to the positive X axis. If the cut plane was positioned freely, Custom will be displayed automatically.

在交互式创建切割面时，将平面位置和旋转(以及机械手)输入到世界坐标系中。如果您想手动输入这些信息，您可以在任何时候这样做。在最右边你会发现一个下拉菜单，其设置让你旋转切割平面平行于一个特定的平面在世界坐标系。例如，+ x 将使切割面垂直于正 x 轴旋转。如果切割平面是自由定位，自定义将自动显示。

Offset[-∞..+∞m]

偏移量[-∞ . . + ∞ m ]

This value can be used to move the cut layers to one side of the cut line or the other (negative values can also be entered).

此值可用于将切割层移动到切割线的一侧或另一侧(也可以输入负值)。

Number of Cuts[1..2147483647]
Spacing[-∞..+∞m]

削减的数量[1.2147483647]间距[-∞ . + ∞ m ]

The Number of Cuts setting can be used to define any number of parallel cut planes. The Spacing value defines the distance between individual planes. Enable the Regular Slice option if the number of cuts should be spread evenly across the object’s width.

切割数设置可以用来定义任意数量的平行切割平面。间距值定义了各个平面之间的距离。如果切割的次数应该均匀地分布在对象的宽度上，则启用 Regular Slice 选项。

Restrict To Selection

限制选择

If enabled, only selected polygons or edges will be cut.

如果启用，只有选定的多边形或边缘将被切断。

Select Cuts

选择切割

If enabled, newly created cut lines will be selected (visible only in Use Edge mode).

如果启用，新创建的切线将被选中(仅在使用边缘模式下可见)。

Connect Cut Edges

连接切割边缘

If enabled, polygons will also be cut. Otherwise only edges will be cut.

如果启用，多边形也将被切割。否则只有边缘将被切割。

Preserve N-gon Curvature

保持 n ー gon 曲率

If this option is disabled, the cut will be made linearly through the non-planar N-gons, i.e., the N-gon’s shape will be modified; if this option is enabled, the function will attempt to maintain the original shape by creating new points (at the cut location with the N-gon lines).

如果这个选项被禁用，切割将通过非平面的 N-gon 线性进行，也就是说，N-gon 的形状将被修改; 如果这个选项被启用，该函数将尝试通过创建新点(在与 N-gon 线切割的位置)来保持原始形状。

Auto Snap

自动捕捉

This tool has its own auto snap function, which can be used to snap to points, edges or polygons of selected objects. You can also use the regular Snap function instead but the color coding (blue for polygons, red for edges, green for points) will not be used.

这个工具有自己的自动抓取功能，可以用来抓取选定对象的点，边缘或多边形。你也可以使用常规的 Snap 函数，但是不使用颜色编码(蓝色代表多边形，红色代表边缘，绿色代表点)。

Regular Slice

常规切片

This option can be enabled in the Plane mode, local, world, camera, to distribute the Number of Cuts evenly across a selected surface.

此选项可以在平面模式、本地模式、世界模式、摄像机模式下启用，以便在选定的表面上均匀分布切割数。

Angle Constrain
Angle[0.1..180°]

角度约束角[0.1. . 180 ° ]

If this option is enabled, the cut line will be constrained to the angle interval defined by the Angle value. This can also be done without enabling this option by pressing the Shift key while creating cuts.

如果启用此选项，则切割线将被限制为由 Angle 值定义的角度间隔。这也可以在不启用这个选项的情况下通过按下 Shift 键来创建削减。

Realtime Cut

实时剪辑

When editing the manipulator, the currently selected cut line (yellow) can be displayed in realtime (option enabled; slower) or after the mouse button is released (option disabled; faster). A speed advantage can also be achieved when adjusting the manipulator.

当编辑机械手时，当前选择的切线(黄色)可以实时显示(启用选项; 慢)或者在释放鼠标按钮后(选项禁用; 快)。在调整机械手时还可以获得速度上的优势。

Disabling this option is advantageous with regard to workflow speed when working with objects with very high subdivisions (e.g., 1 million or more points).

当处理具有非常高的细分(例如，100万或更多的点)的对象时，禁用此选项对工作流速度有利。