Options

选择

Note that these settings are not interactive but must be defined prior to creating cuts.

请注意，这些设置不是交互式的，但必须在创建剪切之前进行定义。

Most of these settings are only useful in conjunction with cutting polygon meshes. Most of these settings will have no effect when cutting splines.

大多数这些设置只有在切割多边形网格时才有用。大多数这些设置将没有影响时，削减样条。

Visible Only

只能看见

If this option is enabled, only visible edges and polygons will be cut, i.e., no back sides will be cut. Regions covered by other objects are not included.

如果启用此选项，只有可见的边和多边形将被切割，也就是说，没有后面将被切割。其他对象覆盖的区域不包括在内。

Slice Mode

切片模式

Use this setting to define how precisely a cut should be made:

使用这个设置来确定切割的精确程度:

• Cut 停: The normal cut mode in which a cut line cuts edges or polygons and a single cut point is created on each edge or polygon edge. Nothing will be removed. 在每条边或多边形边上创建一条切线或多边形，并创建一个切点的正常切割模式。任何东西都不会被移除
• Split 分裂: When cut, two identical but disconnected vertices will be created along the cut line, along which the elements will be split. 当切割，两个相同但不连接的顶点将沿着切割线创建，沿着这些元素将被分割
• Remove Part A/B 拆除甲部/乙部: One of the halves of the cut element will be removed. It’s not possible to determine which is half : 切割元件的一半将被移除。不可能确定哪个是一半A and which 哪一个B. If the wrong half is deleted, simply undo the operation and remove the other half (reversing the vertex order can also reverse the result). Deletion works best if the cut line’s start and end points lie outside of the object to be cut. The cut line must run across the entire object for this mode to work. .如果错误的一半被删除，只需撤消操作并删除另一半(反转顶点顺序也可以反转结果)。如果删除线的开始点和结束点位于要删除的对象之外，那么删除效果最好。切割线必须贯穿整个对象，这种模式才能工作

Single Line

单行

If this option is enabled, the cut line will always be made up of only 2 control points. This makes it possible to quickly create successive cuts: click and drag the cut line, then release the mouse button; repeat as often as needed. You can still click on a visible cut line to create a control point.

如果启用此选项，则切割线将始终只由2个控制点组成。这使得快速创建连续切割成为可能: 点击并拖动切割线，然后释放鼠标按钮; 根据需要经常重复。您仍然可以单击可见的切割线来创建控制点。

Infinite Cut

无限切割

This setting will extend the cut line indefinitely, which makes it possible to also cut (selected) objects or mesh outside of the Viewport view.

此设置将无限延长切割线，这使得在 Viewport 视图之外切割(选择)对象或网格成为可能。

Restrict To Selection

限制选择

If enabled, only selected polygons or edges will be cut.

如果启用，只有选定的多边形或边缘将被切断。

Select Cuts

选择切割

If enabled, newly created cut lines will be selected (visible only in Use Edge mode).

如果启用，新创建的切线将被选中(仅在使用边缘模式下可见)。

Connect Cut Edges

连接切割边缘

If enabled, polygons will also be cut. Otherwise only edges will be cut.

如果启用，多边形也将被切割。否则只有边缘将被切割。

Preserve N-gon Curvature

保持 n ー gon 曲率

If this option is disabled, the cut will be made linearly through the non-planar N-gons, i.e., the N-gon’s shape will be modified; if this option is enabled, the function will attempt to maintain the original shape by creating new points (at the cut location with the N-gon lines).

如果这个选项被禁用，切割将通过非平面的 N-gon 线性进行，也就是说，N-gon 的形状将被修改; 如果这个选项被启用，该函数将尝试通过创建新点(在与 N-gon 线切割的位置)来保持原始形状。

Auto Snap

自动捕捉

This tool has its own auto snap function, which can be used to snap to points, edges or polygons of selected objects. You can also use the regular Snap function instead but the color coding (blue for polygons, red for edges, green for points) will not be used.

这个工具有自己的自动抓取功能，可以用来抓取选定对象的点，边缘或多边形。你也可以使用常规的 Snap 函数，但是不使用颜色编码(蓝色代表多边形，红色代表边缘，绿色代表点)。

Angle Constrain
Angle[0.1..180°]

角度约束角[0.1. . 180 ° ]

If this option is enabled, the cut line will be constrained to the angle interval defined by the Angle value. This can also be done without enabling this option by pressing the Shift key while creating cuts.

如果启用此选项，则切割线将被限制为由 Angle 值定义的角度间隔。这也可以在不启用这个选项的情况下通过按下 Shift 键来创建削减。

Realtime Cut

实时剪辑

If cut line control points are moved, the resulting cut points will normally be displayed in white. For objects with very high subdivision (e.g, with more than 1 million points), the calculation of the preview can take quite some time, which bogs down interactivity. In such cases, this option should be disabled. The preview will then be created when you release the mouse button.

如果切割线控制点被移动，产生的切割点通常会显示为白色。对于非常高细分的对象(例如，超过100万个点) ，预览的计算可能需要相当长的时间，这降低了交互性。在这种情况下，应禁用此选项。然后，当您释放鼠标按钮时，预览将被创建。