Mirror 镜子Options 选择Tool 工具
Options
选择
模式
克隆
Cloned guide with 克隆指南Auto
Root active. 活跃的
If in the Clone mode, the selected guides can be doubled and mirrored onto the opposite side of the mirror surface.
如果在克隆模式下，选定的导轨可以加倍并反射到镜面的另一侧。
插入
This mode interpolates edited hairstyles. Guides must, though, already be present on the other side of the selected guides or of the mirror surface. These should be distributed symmetrically, since only very small diversions from ideal symmetry can be compensated for.
这种模式插入编辑过的发型。然而，指南必须已经出现在选定的指南或镜面的另一边。这些应该对称分布，因为只有非常小的偏离理想对称可以得到补偿。
The selected guides are shown on the mirrored side
as a preview. 选定的指南显示在镜像侧作为预览
This setting can only be used in conjunction with the Clone mode and ensures that the cloned guides are planted (rooted) right away – assuming geometry exists at the location to which the guides are cloned.
此设置只能与克隆模式结合使用，并确保立即种植(根)被克隆的指南——假设在指南被克隆的位置存在几何体。
力量[0. . 100% ]
Use this slider to define the strength of interpolation on the guides. The higher the value, the closer the affected guides will match the mirrored guides.
使用这个滑块来定义指南上的插值强度。值越高，受影响的指南将越接近镜像指南。
搜索[0. . + ∞ m ]
If the arrangement of guides is not perfectly symmetrical, when in the Interpolate mode, you can try to find a fitting equivalent to the selected guides on the mirrored side by increasing the Search value (the guide root being the decisive factor). This will only work with an existing guide distribution that is fairly symmetrical. Guides that grow wildly (i.e. those created using the Polygon Area option in the Hair object’s Guides tab) will not exactly be partial to this function.
如果指南的排列不是完全对称的，在插值模式下，您可以尝试通过增加搜索值(指南根是决定性因素)来找到与镜像侧选定指南相等的拟合值。这将只与现有的指南分布是相当对称的工作。长得很疯狂的指南(例如那些在毛发对象的指南标签中使用多边形区域选项创建的指南)不会完全偏爱这个功能。
Guides[-2147483648..2147483647]
指南[-2147483648. . 2147483647]
From left to right: Initial state; guide = X; guide
= 10. 从左到右: 初始状态; guide = x; guide = 10
If a guide is found on the mirrored side when in the Interpolation mode, the Guides setting will cause exactly as many interpolations to be created in close proximity the mirrored guide, i.e., the guides within a close radius will be made to look similar to the hairstyle that was mirrored.
如果在镜像侧找到一个指南时，在插值模式，指南设置将导致许多插值创建在接近镜像指南，也就是说，在一个接近半径的指南将看起来类似的发型，被镜像。
Use this setting to select the coordinate system the mirror plane (Mirror setting) should use:
使用这个设置来选择镜面应该使用的坐标系:
镜子
Use this setting to determine the mirror plane. The corresponding coordinate system should be selected using the Coords setting.
使用这个设置来确定镜面，应该使用 Coords 设置来选择相应的坐标系。
对象
If Custom is selected in the Coords setting, the coordinate system of the object placed into this field will define the coordinate system of the mirror plane.
如果在 Coords 设置中选择 Custom，那么放置在这个域中的物体的坐标系将定义镜面的坐标系。