Options

选择

Towards

走向

Use the Towards setting to define which center point the guides should bend towards. The following options are available:

使用“朝向”设置来定义指南应该朝向哪个中心点。可以使用以下选项:

• Line: Based on the guides selected, an 第行: 根据选定的向导,average 平均 line will be created in whose direction the guides will bend. 这条线会沿着指引线的方向弯曲

• Center: The guides will be bent towards their common center. 导轨向公共中心弯曲

• Average: An 平均分: 1分average 平均 point of all selected guides will be determined, to which the guide tips will be attracted. 将确定所有选定的指南点，指南提示将吸引到

Keep Lengths

保持距离

Deactivate this setting if you want the clumps to come together at one point. This will stretch (at 100% strength) guides located further away until they meet at a point. Otherwise, they will simply be attracted to their common center, but will not be stretched to reach it.

如果你想让这些团块在某一点聚集在一起，则禁用此设置。这将拉伸(在100% 强度)导游位于更远的地方，直到他们在一个点满足。否则，它们只会被吸引到共同的中心，而不会被拉伸到那里。

Strength[-100..100%]

力量[-100. . 100% ]

This setting defines how strongly the guides should be clumped. This setting is interactive, which means you can adjust the setting by clicking and dragging the mouse in the editor window. A negative value can also be entered, which will cause the guides to be pushed apart.

这个设置定义了指南应该聚集的强度。此设置是交互式的，这意味着您可以通过在编辑器窗口中单击和拖动鼠标来调整该设置。还可以输入负值，这将导致导轨被推开。

Curve

曲线

Use these graphs in Line or Average mode to adjust the strength of clumping along the length of the guides.

在直线或平均模式下使用这些图表来调整沿着导轨长度聚集的强度。

Rotate
Rotation[-∞..+∞°]
Curve

旋转转动[-∞ . . + ∞ ° ]曲线

Activate this option if you want the clump to rotate around its common axis. The degree to which the clump is rotated can be set using the Rotation setting. Use the curve to define the degree of rotation along the length of the guides.

激活这个选项，如果你想要的丛旋转其共同的轴。可以使用旋转设置来设置块旋转的程度。使用曲线来定义沿导轨长度的旋转度。