Tag Properties

标签属性

Blend[0..100%]

混合[0. . 100% ]

Use this setting to define the position of the camera to be morphed in its path across all cameras defined in the Morph Camera tag. These are:

使用此设置来定义相机的位置，以便在所有相机定义在 Morph Camera 标签中的路径变形。这些是:

• for 为了Source Mode 源模式Simple Morph 简单的变体: Camera 1 1号摄像机 and 及Camera 2 2号摄像机
• for 为了Source Mode 源模式Multi Morph 多形态: all cameras on the 所有摄像头List 清单 in the order they are listed. 按照它们的排列顺序

Click on the small arrow at the left of the Blend setting to open the corresponding Blend Curve:

点击 Blend 设置左边的小箭头，打开相应的 Blend Curve:

Blend Curve

混合曲线

This curve can be used to fine-tune the Blend setting. The default linear progression produces a proportional relationship between the Blend setting and the camera movement. This is in principle the same as the Timeline’s Time Track (if blending is seen from a temporal point of view) in that various behaviors can be defined by modifying the Blend value.

此曲线可用于微调混合设置。默认的线性级数在 Blend 设置和相机移动之间产生一个比例关系。这在原则上与时间轴的时间轨迹相同(如果从时间的角度看待混合) ，各种行为可以通过修改 Blend 值来定义。

Interpolation

插值

These three options can be used to define the interpolation between cameras (this is not only a positional interpolation - other settings such as Focal Length can also be interpolated):

这三个选项可以用来定义相机之间的插值(这不仅是一个位置插值-其他设置，如焦距也可以插值) :

• Linear 线性: A Morph Camera moves along the shortest path from one camera to the next. 变形摄像机沿着最短的路径从一个摄像机移动到下一个

• Soft 1 软件1: The animation spline path has a : 动画样条路径有一个Cubic 立方体 interpolation (with each camera position as supporting points). 插值(以每个摄像机位置作为支持点)

• Soft 2 软件2: The animation spline path has a : 动画样条路径有一个Akima 女名女子名 interpolation (each camera position a supporting point). 插值(每个摄像机的位置都是一个支撑点)

Stabilize

稳定

If enabled, the Up Vector for the Morph Camera will be set vertically, i.e., your angle of view’s tilt will always be 0°.

如果启用，变形相机的向上矢量将被垂直设置，也就是说，你的视角将总是倾斜0 ° 。

If this option is disabled, tilting can occur during interpolation even if a given camera is not tilted (the shortest path per interpolation type will be used).

如果禁用此选项，即使给定的摄像机不倾斜，插值过程中也会出现倾斜(将使用每个插值类型的最短路径)。

Stabilizing Object

稳定目标

If the previously described Stabilize option is enabled, an additional object can be defined here whose Y axis orientation displays the Up Vector for the Morph Camera, i.e., if you rotate the object the camera will rotate with it (relevant to its tilt).

如果前面描述的稳定选项被启用，一个额外的对象可以在这里定义，其 y 轴方向显示变形相机的向上矢量，也就是说，如果你旋转对象，相机将随之旋转(与其倾斜相关)。

Source Cameras

来源: 摄像机

Source Mode

源模式

2 modes are available:

有两种模式供选择:

• Simple Morph 简单的变体: Morphing will take place between 2 cameras. Both camera fields ( 变形将在两个摄像机之间进行。两个相机字段(Camera 1 1号摄像机 and 及Camera 2 2号摄像机) can be animated, which makes it possible to use the individual cameras to affect the Morph Camera. )可以是动画，这使得有可能使用单个摄像机来影响变形相机
• Multi Morph 多形态: Any number of separate cameras can be used in the morphing process. : 可以在变形过程中使用任意数量的单独相机

Camera 1
Camera 2

1摄像头2摄像头

If Source Mode is set to Simple Morph, these menus can be used to define the various parameters (for 2 selected cameras in conjunction with the Camera Morph command).

如果源模式设置为简单变形，这些菜单可以用来定义各种参数(为2个选定的相机与相机变形命令)。

List

清单

If Source Mode is set to Multi Morph, all cameras along which the Morph Camera should move can be dragged into this list. This list will be automatically filled in when at least 2 cameras are selected and the Camera Morph command is selected.

如果源模式设置为多变形，所有变形相机应该移动的相机可以拖动到这个列表。这个列表将自动填写时，至少有2个相机被选中，相机变形命令被选中。

Note that the sequence in this list also defines the order in which the Morph Camera will acquire each camera.

注意，这个列表中的顺序也定义了变形相机获取每个相机的顺序。