PSD Settings

设置

PSD Settings

设置

In Animate Mode, if Correctional PSD morphs have been created, they will have additional options to define how each morph is being automatically driven. Clicking the little arrows will expose the settings used for the pose-based driving of the morph. At least one of these settings needs to have a value above 0% for the automatic driving to have any influence on the morph.

在动画模式下，如果修正 PSD 变体已经创建，他们将有额外的选项来定义每个变体是如何被自动驱动。点击小箭头会显示变形体基于姿态的驾驶设置。至少其中一个设置需要有一个值大于0% 的自动驾驶有任何影响的变形。

Auto Weighting

自动称重

√Enable or disables Auto Weighting as a whole. It can be useful to disable Auto Weighting completely if you need to drive the morph by other means. For example, to drive a muscle contraction based on other parameters than the pose of your joints.

√允许或禁用自动权重作为一个整体。它可以是有用的禁用自动加权完全，如果你需要驱动的变形通过其他方式。例如，根据关节的姿势以外的其他参数来驾驶肌肉收缩。

Auto Orient Blend

自动东方混合

This parameter will make use of the local orientation variations of the driver joint(s) to drive the strength of each point of the morph. The orientation is basically defined as where the joint is aiming at. The higher the v alue, the more the morph will be driven based on this parameter.

这个参数将利用驾驶员关节的局部方向变化来驱动变形的每个点的强度。方向基本上定义为关节瞄准的位置。V 值越高，根据这个参数驱动的变形越多。

Auto Twist Blend

自动扭曲混合

This parameter will make use of the local banking variations of the driver joint(s) to drive the strength of each point of the morph. The higher the value, the more the morph will be driven based on this parameter.

这个参数将利用驱动器接头的局部银行变量来驱动变形的每个点的强度。值越高，基于此参数的变形驱动越多。

Auto Pos Blend

自动定位混合

This parameter will make use of the local position variations of the driver joint(s) to drive the strength of each point of the morph. The higher the value, the more the morph will be driven based on this parameter.

这个参数将利用驾驶员关节的局部位置变化来驱动变形的每个点的强度。值越高，基于此参数的变形驱动越多。

Total Average Output

总平均产量

This parameter is read-only and can be used to drive other parameters based on the global averaged automatic blending applied to the Correctional PSD morph. You could use this value by linking it via XPresso to another morph, for example, or to drive the strength of a Deformer.

这个参数是只读的，可以用来驱动其他参数的基础上全局平均自动融合应用于修正 PSD 形态。您可以通过将其通过 XPresso 链接到另一个变体来使用这个值，例如，或者驱动变形器的强度。

It can also be a useful tool to see how much the current morph is influencing the mesh when trying to reach a different pose.

它也可以是一个有用的工具，看看有多少当前变形是影响网格时，试图达到不同的姿势。