Object Properties

对象属性

Radius[0..+∞m]

半径[0. . + ∞ m ]

Defines the object’s radius.

定义对象的半径。

Height[0..+∞m]

高度[0. . + ∞ m ]

The overall length (the body plus the caps) of the oil tank.

油箱的总长度(箱体加上盖子)。

Height Segments[1..1000]

高度段[1. . 1000]

Defines the number of subdivisions of the object in the lengthwise direction (cylindrical part only).

在纵向上定义对象的细分数(仅限于圆柱形部分)。

Cap Height[0..+∞m]

帽高[0. . + ∞ m ]

This controls the cap curvature. A value of 0 produces flat caps. You can set values up to the same value as the Radius. For hemispherical caps, set the Cap Height to the same value as Radius.

这控制了帽子的弯曲度。值为0将生成平盖。你可以设置与半径相同的值。对于半球形盖板，将盖板高度设置为与半径相同的值。

In contrast to the cone and capsule, the transition from the cylinder barrel to the cap is always sharp, the exception being if you have set the Cap Height to the maximum value.

与锥形和胶囊形成对比的是，从气缸筒到瓶盖的过渡总是很快，除非你把瓶盖高度设置为最大值。

Cap Segments[1..1000]

Cap Segments [1. . 1000]

The subdivision level of the caps in a radial direction.

在放射状方向上的帽子的细分水平。

Rotation Segments[3..1000]

旋转片段[3. . 1000]

The number of subdivisions of the oil tank around its circumference. The greater this value, the more rounded the oil tank appears.

油箱周围的细分数。这个值越大，油箱就显得越圆。

Orientation

定向

Choose a value from this drop-down list to set the object’s initial orientation in space. This gives you a quick way to turn the object on its axis.

从此下拉列表中选择一个值，以设置对象在空间中的初始方向。这给你一个快速的方法来转动对象的轴。