Object Properties

对象属性

Type

类型

Line

第一行

The default guideline Type is Line.

默认准则类型为第行。

Plane

飞机

A guide Plane can be created from any guide Line when you select Plane (this can also be done interactively using the Guide Tool).

当你选择平面的时候，可以从任何平面线上创建一个导航平面(这也可以用导航工具交互地完成)。

The guide Plane has three Handles (and a different icon in the Object Manager).

引导平面有三个句柄(在对象管理器中有一个不同的图标)。

Depending on the active tool, they work as follows:

根据活动工具的不同，它们如下工作:

• Move tool: 1st Handle moves the complete Plane; 2nd and 3rd Handles extend the Plane in the X and Z directions. 移动工具: 第一个手柄移动整个平面; 第二和第三个手柄沿 x 和 z 方向延伸平面
• Guide tool: 1st and 2nd Handles each rotate the Plane around the 3rd Handle; 3rd Handle swivels the Plane around a hinge (that is created by the first two Handles) or expands the Plane. 导航工具: 第一和第二把手各自旋转飞机围绕第三把手; 第三把手旋转飞机围绕一个铰链(这是由前两个把手创建)或扩展飞机

You can also simply create guidelines by running the cursor along both edges that border the corner with no Handle until red points appear. Here you can pull out parallel guidelines that will be made Child objects of the guide Plane. This way you can create additional basic working planes, if necessary.

您也可以简单地创建指导方针运行光标沿两边缘的边角没有句柄，直到红点出现。在这里您可以拉出平行的指导方针，将子对象的指导平面。这样你就可以创建额外的基本工作平面，如果必要的话。

Line Mode

线路模式

A guide Line can have an Infinite length in either direction, can stretch in only one direction starting from a defined point (Halfline, or it can be created as a Segment with a starting and an end point.

导向线可以在任意一个方向上有无限长度，可以从一个确定的点开始向一个方向延伸(Halfline，或者可以创建一个带有起始点和终止点的段。

Spatial Mode

空间模式

• Line 第一行: Two additional guidelines perpendicular to the guide Line will be displayed as an axis crosshair. : 垂直于导向线的另外两条导向线将显示为轴线十字线
• Plane 飞机: Two additional guidelines perpendicular to the Plane will be displayed. : 另外两条垂直于平面的导则将会显示出来

Size X[0..+∞m]
Size Z[0..+∞m]

尺寸 x [0. . + ∞ m ]尺寸 z [0. . + ∞ m ]

These two settings can be used to define the size of the plane if Type is set to Surface. If Type is set to Linie, the Size Z value defnes the distance between both handles.

如果 Type 设置为 Surface，则可以使用这两个设置来定义平面的大小。如果 Type 设置为 Linie，则 Size z 值减小两个句柄之间的距离。

Axis Centered

轴心

Only available if Type is set to Plane and Spatial Mode is enabled. The three guidelines will be centered and thus made symmetrical.

只有在 Type 设置为平面模式和空间模式时才可用。这三个指导方针将居中，从而使对称。