Time
时间
Basic 基础Coord.Effector 效果器Parameter 参数Deformer 分离器Falloff 女名女子名Time
时间
Tip: 提示:
The Time Effector establishes its transformation values in accordance with the length of the animation. Thus, this Effector is ideal for creating effects based on animation length without having to set keys.
时间效果器根据动画的长度确定其转换值。因此,这种效果器是理想的创建基于动画长度的效果,而不必设置键。
Example 1: 例子一:If, in addition, the weighting should change from 0% to 100% within 10 second, simple set Weight Transformation to 10%. Yep, that’s it, you’re done.
此外,如果权数在10秒内由0% 变为100% ,则简单设置权数转换为10% 。是的,就这样,你完成了。
Except for the Strength, Minimum and Maximum sliders, the Time Effector has no other special controls. Use the Strength slider to adjust the strength of the effect (values less than 0% and greater than 100% are possible). Use the Minimum and Maximum sliders to limit or expand the value range accordingly.
除了力量,最小和最大滑块,时间效果器没有其他特殊控制。使用强度滑块来调整效果的强度(值小于0% 和大于100% 是可能的)。使用最小和最大滑块限制或扩大相应的值范围。
例子二:
In conjunction with a Random Effector, which exclusively affects the weighting, the Time Effector can also be used to vary the animation velocity of individual clones:
与专门影响加权的随机效果器一起,时间效果器也可以用来改变单个克隆的动画速度:
To summarize: The Random Effector only affects the weighting, the Time Effector (with a defined Time Offset) modifies the velocity of the animation of individual clones depending on the weighting. More information regarding weighting can be found here: Weight Transform.
总结一下: 随机效果器只影响加权,时间效果器(有一个定义的时间偏移)根据加权修改个体克隆的动画速度。更多关于权重的信息可以在这里找到: 权重转换。