Effector

效果器

Strength[-∞..+∞%]

强度[-∞ . . + ∞% ]

The Strength value is a measure of the Effector’s overall strength. As with other Strength values, this can also be set to less than 0% or greater than 100%.

力量值是衡量效果器整体力量的指标。与其他强度值一样，这个值也可以设置为小于0% 或大于100% 。

Selection

选择

A MoGraph Selection or MoGraph Weightmap tag can be dragged into this field or placed automatically by selecting a Cloner Object and an existing MoGraph selection/weighting, and creating an Effector.

MoGraph Selection 或 MoGraph Weightmap 标签可以拖放到这个字段中，或者通过选择 Cloner 对象和现有的 MoGraph 选择/权重并创建一个 Effector 自动放置。

The Effector will then work as follows, depending on the tag’s settings:

然后 Effector 将按照以下方式工作，具体取决于标记的设置:

• MoGraph Selection 选择 MoGraph tag: Will only affect the clones belonging to the selection. 标签: 将只影响属于选择的克隆
• MoGraph Weightmap 图片: MoGraph/Weightmap tag: The clone weighting (values between 0% and 100%) saved in the tag will be multiplied with the effector strength. 标签: 保存在标签中的克隆加权值(值在0% 和100% 之间)将与效果器强度相乘

Effectors

效果器

Drag all Effectors into this list that should be unified or grouped in the ReEffector. This list works exactly like the Effector list in the clone-generating object (e.g., Cloner or Shatter object). However, the ReEffector can also define exactly which effect should be applied using the Parameter tab settings.

将所有效果器拖动到这个列表中，这些效果器应该在 ReEffector 中统一或分组。此列表的工作原理与克隆生成对象(例如，Cloner 或 Shatter 对象)中的 Effector 列表完全相同。但是，ReEffector 也可以使用 Parameter 选项卡设置准确定义应该应用哪些效果。

See also Effectors.

参见效果器。