Effector

效果器

Strength[-∞..+∞%]

强度[-∞ . . + ∞% ]

Use this setting to adjust the overall strength of the effect. Values of less than 0% and greater than 100% can be entered.

使用此设置来调整效果的整体强度。可以输入小于0% 和大于100% 的值。

Selection

选择

A MoGraph Selection or MoGraph Weightmap tag can be dragged into this field or placed automatically by selecting a Cloner Object and an existing MoGraph selection/weighting, and creating an Effector.

MoGraph Selection 或 MoGraph Weightmap 标签可以拖放到这个字段中，或者通过选择 Cloner 对象和现有的 MoGraph 选择/权重并创建一个 Effector 自动放置。

The Effector will then work as follows, depending on the tag’s settings:

然后 Effector 将按照以下方式工作，具体取决于标记的设置:

• MoGraph Selection 选择 MoGraph tag: Will only affect the clones belonging to the selection. 标签: 将只影响属于选择的克隆
• MoGraph Weightmap 图片: MoGraph/Weightmap tag: The clone weighting (values between 0% and 100%) saved in the tag will be multiplied with the effector strength. 标签: 保存在标签中的克隆加权值(值在0% 和100% 之间)将与效果器强度相乘

Min/Max

最低/最高

Maximum[-∞..+∞%]
Minimum[-∞..+∞%]

最大[-∞ . . + ∞% ]最小[-∞ . . + ∞% ]

Use these settings to increase or decrease internal range values.

使用这些设置可以增加或减少内部范围值。

Note also the Remapping settings for the Layers in the Field list. Use this Field functionality as your preferred method since it’s more powerful and easier to understand in combination with other Layers.

还要注意字段列表中图层的重新映射设置。使用这个字段功能作为您的首选方法，因为它更强大，更容易理解与其他层组合。