Object Properties

对象属性

Bounce[0..+∞%]

反弹[0. . + ∞% ]

Indicates how bouncy the deflectors should be, i.e., the degree of rebound. With a value of 100%, the exit angle is the same as the entry angle. The smaller the elasticity value, the more the particle’s energy is absorbed by the deflector and the more the motion proceeds along the direction of the deflector.

指示偏转器的弹性应该有多大，即反弹的程度。当值为100% 时，出口角度与入口角度相同。弹性值越小，质点的能量被偏转器吸收越多，质点沿偏转器方向的运动越大。

Split Beam

分裂光束

If this option is enabled, the deflector divides the particle stream. Some of the particles will be deflected, while the remaining particles ignore the deflector and pass through unhindered.

如果启用此选项，偏转器将分离粒子流。一些粒子将被偏转，而其余的粒子忽略偏转并且不受阻碍地通过。

Size X[0..+∞m]
Size Y[0..+∞m]

尺寸 x [0. . + ∞ m ]尺寸 y [0. . + ∞ m ]

Defines the size of the Deflector modifier in the X and Y directions.

在 x 和 y 方向上定义偏转修正器的大小。