Mesh Deformer

网眼变形器

Mesh Deformer

网眼变形器

This Deformer, also known as Cage Deformer in most applications, allows you to create a custom low-resolution cage around your objects that will be used to deform them freely. It behaves a bit like the FFD Deformer, with the added flexibility of creating your own cages using any polygonal object.

这个变形器，在大多数应用程序中也被称为笼变形器，允许你在你的物体周围创建一个自定义的低分辨率笼子，将被用来自由变形他们。它的表现有点像 FFD 变形器，具有使用任何多边形对象创建自己的笼子的额外灵活性。

So what could it be useful for? Many things.

那么它有什么用呢? 很多东西。

For example, it could replace a lengthy joint/weight painting setup if you only need to do some quick deformations. It can also be used in conjunction with Joints, of course, since this low-resolution mesh can be used to drive a much higher-resolution one, which would be problematic to weight properly to Joints. Instead, you can weight your Joints directly to that low-resolution cage, which will in turn deform the high-resolution mesh.

例如，如果你只需要做一些快速的变形，它可以替代一个冗长的关节/重量绘画设置。当然，它也可以与关节结合使用，因为这种低分辨率的网格可以用来驱动一个更高的分辨率，这将是有问题的重量适当的关节。相反，你可以把你的关节直接加重到那个低分辨率的笼子里，这反过来又会使高分辨率的网格变形。

Since the cage is polygonal, any other Deformer or Expressions can be used with it, such as Pose Morph.

由于笼子是多边形的，任何其他的变形器或表达式可以与它一起使用，如姿势变形。

The Mesh Deformer can also be used to add deformations on top of Joints by simply weighting the high-resolution mesh along with the low-resolution cage, so that the cage follows the movements of the mesh, allowing you to add deformation whenever necessary. That way it could, for example, be used to create complex squash and stretch effects.

网格变形器也可以用来增加变形的关节顶部只需加权高分辨率的网格和低分辨率的笼子，使笼子跟随运动的网格，允许您添加变形无论何时必要。例如，这种方法可以用来创建复杂的压缩和拉伸效果。

This tool can also be used for modeling to quickly change basic proportions in a character in a non-destructive way. This is very useful if you are unsure of the direction you want to take, or if you have an indecisive client.

这个工具也可以用于建模，以快速改变一个字符的基本比例在一个非破坏性的方式。这是非常有用的，如果你不确定你想采取的方向，或者如果你有一个优柔寡断的客户。

The possibilities are vast, don't hesitate to explore!

可能性是巨大的，不要犹豫去探索！

Note that the Mesh Deformer does not work in conjunction with Primitives.

请注意，网格分解器不与原语一起工作。

Example workflow for making a Mesh deformer work:

制作 Mesh 分解器的工作流程示例:

• Create a Mesh deformer and make it a Child object in the 创建一个 Mesh deformer，并将其设置为Object Manager 对象管理器 of the object you want to deform. 你想要变形的物体
• Create a second object (the cage), whose points will define the deformation. Make the primitives editable. 创建第二个对象(笼子) ，它的点将定义变形。使原语可编辑
• Drag the cage object into the Mesh deformer’s 将笼状物体拖到网格分解器中Cages 笼子 list and click on the 列表，然后点击Initialize 初始化 button. 按钮
• Select the cage in the 选择笼子Object Manager 对象管理器 and switch to 然后切换到Point 重点 mode. If you now modify these points the original object will be modified accordingly. 方式。如果您现在修改这些点，原始对象将被相应地修改