Layer Controls

图层控制

Shape

形状

You can choose from various Shapes that will repeat at a defined point. Note that these shapes can be adjusted further using the Remapping tab’s settings. For example, if the Triangle curve should also have a negative segment, the Min value can be set to -100% in the Remapping tab.

您可以从各种形状中进行选择，这些形状将在定义的点上重复。请注意，可以使用 Remapping 选项卡的设置进一步调整这些形状。例如，如果三角形曲线也应该有一个负段，那么可以在 Remapping 选项卡中将 Min 值设置为 -100% 。

Rate

税率

This value defines the time span in frames within which the Time layer will reach a value of 1 or 100%. In other words, smaller values will produce a correspondingly faster value increase (faster effect) and vice-versa.

此值定义了时间层将达到1或100% 值的帧的时间跨度。换句话说，更小的值会产生相应的更快的值增长(更快的效果) ，反之亦然。

Offset

偏移量

This setting can be used to define a temporal offset to the current time. A value of -30, for example, a Time layer effect will initiate at a time of +30.

此设置可用于定义当前时间的时间偏移量。例如，当值为 -30时，时间层效果将在 + 30时开始。

A Subfield can also be created for this parameter.

还可以为此参数创建子字段。