UV Straighten

紫外线矫正

This command linearizes coherent selected edge sections by creating a linear connection between the first and last point of each edge section and arranges these horizontally or vertically, depending on what’s defined.

这个命令通过在每个边缘部分的第一个和最后一个点之间创建一个线性连接来线性化选择相干的边缘部分，并根据定义的内容水平或垂直地排列这些部分。

The edge sections cannot create a loop and cannot branch or cross each other.

边缘部分不能创建循环，也不能相互分支或交叉。

Options

选择

Auto Align

自动对齐

If this option is disabled, a straight will be created between the start and end point of each selected coherent edge section that will follow the edge section. If enabled, the start and end points will also be arranged in the direction that comes most closely to that of the straight - horizontally or vertically.

如果禁用此选项，将在每个选定的连贯边缘部分的起始点和终止点之间创建一条直线。如果启用，开始点和结束点也将被安排在最接近的方向的直线-水平或垂直。

If Keep Length is also enabled, the start and end points of the straight will be moved correspondingly.

如果保持长度也启用，起点和终点的直线将相应地移动。

Keep Length

保持长度

If this option is enabled, the exact distances between the points of the selected edge section will be maintained, i.e., the edge section’s totatl length will remain constant (this can, however, result in distortions).

如果启用此选项，则选定边缘部分的点之间的确切距离将保持不变，即边缘部分的 totatl 长度将保持不变(但这会导致扭曲)。

Otherwise these can be adjusted depending on the options enabled.

否则，可以根据启用的选项调整这些选项。

Equidistant Distribution

等距分布

If enabled, the points of a coherent selected edge section will each be set to the same distance apart (this can, however, result in distortions).

如果启用，一个连贯选择的边缘部分的每个点将被设置为相同的距离(这可能会导致扭曲)。

If Keep Length is also enabled, this function will be executed prior to the Equidistant Distribution function.

如果保持长度也是启用的，这个功能将执行之前的等距分布函数。