ArchiCAD 18+ Combine Project

18 + Combine Project

This function is similar to the Combine Project... command. However, since ArchiCAD 18 exports scenes with a different structure, which must subsequently be optimized using this new command. Contrary to the previous version, the following now applies:

这个函数类似于组合项目... 命令。但是，由于 ArchiCAD 18导出的场景具有不同的结构，因此必须随后使用这个新命令对其进行优化。与以前的版本相反，现在适用以下内容:

• Objects are now grouped in logical groups (Null objects) 对象现在分组为逻辑组(空对象)
• Objects can have multiple materials 物体可以有多种材质
• Scenes no longer have layers 场景不再有层次
• The projects are combined much faster 这些项目的合并速度要快得多

Use

使用

When a scene is opened that was exported from ArchiCAD 18 or earlier versions (or if the corresponding command was selected from the Extensions menu), the following dialog window will appear:

当打开从 ArchiCAD 18或更早版本导出的场景时(或者如果相应的命令是从 Extensions 菜单中选择的) ，将出现以下对话框窗口:

The following options are available:

以下方案可供选择:

Yes

是的

The scene will be combined (see Miscellaneous below for more information). If the Cmd/Ctrl key is pressed simultaneously, information about the combination process will be displayed in the Console.

场景将被合并(参见下面的杂项以获得更多信息)。如果同时按下 Cmd/Ctrl 键，则关于组合进程的信息将显示在控制台中。

No

没有

The scene will be loaded with no additional optimization.

场景将被加载，没有额外的优化。

Don’t show this message again after this file has been saved.

保存此文件后不要再次显示此消息。

If this option is enabled, this dialog window will not be displayed the next time this file is opened. For this option to take effect, the file must be saved after the option was enabled.

如果启用此选项，则下次打开此文件时将不会显示此对话框窗口。要使该选项生效，必须在启用该选项后保存该文件。

This dialog window will also not be displayed if the combination process was already previously successfully completed.

如果组合过程以前已经成功完成，也不会显示此对话框窗口。

Miscellaneous

杂项

• Objects will be combined within their respective object types (windows, columns, etc.) according to their materials. Objects that have the same materials or material combinations will be combined to a single object. 对象将根据其材质在各自的对象类型(窗口、列等)内进行组合。具有相同材质或材质组合的物体将组合成一个单一的物体
• When the command is executed, a selection will work as follows: If nothing is selected, all geometry, i.e., everything belonging to the 当命令执行时，选择将如下工作: 如果没有任何选择，所有的几何图形，即，所有属于Model 模型 Null object, will be combined (the same will happen if only 空对象，将被组合(如果只有Model 模型 is selected). If one or or of the Null objects belonging to 选定)。如果一个或多个空对象属于Model 模型 are selected (e.g., Roofs, Walls, etc.), only the objects in these elements will be optimized. 被选择(例如，屋顶，墙壁等) ，只有这些元素中的对象将被优化
• Note that for internal, technical reasons, calling up the command a second time for a scene that was already combined can generate an even smaller number of objects. 请注意，出于内部和技术方面的原因，对已经组合好的场景再次调用命令可以生成更少的对象
• Under 下面ArchiCAD 18 18 you will find an explanation of how an ArchiCAD file can be exported for Cinema 4D, or the 你会发现一个解释如何 ArchiCAD 文件可以导出到 Cinema 4D，或Cinema 4D Exchange User Guide Cinema 4D 交换用户指南 in the ArchiCAD 18 help menu can be referenced for more detailed information. 在 ArchiCAD 18帮助菜单中可以参考更多详细信息

Limitations

局限性

• After a scene has been combined, the 在一个场景被合并后,Merge Objects 合并对象 function will no longer function properly. 功能将不再正常运作
• Undoing the 撤销Combine Project 合并项目 process can take a long time. Save the scene before undoing this process. 过程可能需要很长时间。在撤销这个过程之前保存场景