Axis Center

轴心

The main purpose for this tool is to quickly and easily set the object axis of a polygonal (not parametric!) object. Furthermore, the complete object (even parametric) can be moved to a defined position, including its axis.

这个工具的主要目的是快速和容易地设置一个多边形的对象轴(而不是参数!)对象。此外，完整的对象(甚至是参数化的)可以移动到一个定义的位置，包括它的轴。

The tool affects selected object(s).

该工具影响选定的对象。

Center

中心

This option must be active if you want to move the axes/objects.

如果要移动轴/对象，此选项必须处于活动状态。

Action

行动

Use this setting to define exactly what should be moved:

使用这个设置来确定应该移动什么:

• Axis to: The object axis will be moved (no geometry) 轴到: 对象轴将被移动(没有几何形状)

• Object to: The object geometry will be moved along the axis. 物体: 物体的几何形状将沿着轴线移动

• View Center: The object axis and the corresponding geometry will be moved to the center of the view. 视图中心: 对象轴和相应的几何体将移动到视图的中心

• Parent to: The object axis of the parent object of the object selected in the 属性中选定的对象的父对象的对象轴Object Manager 对象管理器 and its corresponding geometry will be moved onto the selected object. The Position, Rotation and Scale settings will be assumed accordingly. 其对应的几何图形将被移动到选定的对象上。位置，旋转和比例设置将采取相应的

• To Parent: The selected object’s axis and its corresponding geometry will be placed onto the parent object. The Position, Rotation and Scale settings will be assumed accordingly. To Parent: 选定对象的轴及其对应的几何体将放置在父对象上。位置，旋转和比例设置将采取相应的

Center

中心

Use this setting to define how the center, which can consist of different object points, should be calculated.

使用此设置可以定义如何计算可以由不同对象点组成的中心。

• All Points: The center of all selected points will be ascertained. 所有点: 所有选定点的中心将被确定
• Selected Points / Polygons / Edges: The center of all selected points, polygons or edges will be ascertained. 选定点/多边形/边: 确定所有选定点、多边形或边的中心

X, Y, Z

X，y，z

If Axis to or Object to are used in conjunction with a deactivated Points Center option, the X, Y, and Z settings will also be made available. These three settings apply to the dimensions of the object’s bounding box. Object axis and geometry can be placed anywhere within this box.

如果将 Axis to 或 Object to 与已停用的 Points Center 选项一起使用，则还可以使用 x、 y 和 z 设置。这三个设置适用于对象的边界框的尺寸。物体轴线和几何图形可以放置在这个盒子的任何地方。

Alignment

调整

Activate this option if the object axis should be rotated.

如果应该旋转对象轴，则激活此选项。

Axis

轴心

Use this setting to define which axis should be rotated. You can select from:

使用此设置可以定义旋转哪个轴。您可以从以下选择:

• All: All object axes will rotate. 所有: 所有物体轴将旋转
• X, Y, Z: Only the selected axis will be rotated in the defined direction. All other axes will remain orthogonal, but dependent on the prior axis position. X，y，z: 只有选定的轴将在确定的方向上旋转。所有其他轴将保持正交，但取决于先前的轴的位置

Alignment

调整

Use this setting to define the direction the axis defined in the Alignment setting should take:

使用此设置定义对齐设置中定义的轴应该采取的方向:

• Normals: The axes will be rotated as to reflect the existing centered Normals. The Y axis will assume the orientation of the centered normal. 法线: 轴会旋转以反映现有的居中法线。Y 轴将假定中心法线的方向
• Selected Edge: The alignment of the object axis will be adapted to the selection axis (of the selected edges) 选择边缘: 对象轴的对齐将适应选择轴(选择的边缘)
• World: If All is selected, the world coordinate system will be used. If a specific axis is defined only this axis will use the world coordinate system. 世界: 如果一切都被选中，世界坐标系将被使用。如果一个特定的轴被定义，只有这个轴将使用世界坐标系

Points Center

积分中心

This option only makes sense if All Points is selected in the Center setting. The center of all object points will then be ascertained and the axis positioned there.

只有在“所有点”设置中选择“中心”时，此选项才有意义。然后确定所有物体点的中心，并将轴定位在那里。

Position, Rotation, Scale

位置，旋转，比例

These settings define which parameter should be assumed for the To Parent and Parent to options.

这些设置定义了“收件人”选项和“收件人”选项应该使用的参数。

Include Children

包括孩子

Use this setting to define if the currently selected object’s Child object (or its axis) should also be moved in accordance with the described function.

使用此设置可以定义当前选定对象的子对象(或其轴)是否也应该按照所描述的函数移动。

Use All Objects

使用所有对象

Enable this option in addition to the Include Children option if, for example, you have numerous objects grouped beneath a Null object and you want to move the Null object to the center of its Child objects.

除了 Include Children 选项之外，如果在 Null 对象下面组合了许多对象，并且希望将 Null 对象移动到其 Child 对象的中心，则启用此选项。

Otherwise the enabled option will center the axis of the first object of a group of objects in the Object Manager list.

否则，启用的选项将位于对象管理器列表中一组对象的第一个对象的轴的中心。

Auto Update

自动更新

If active, all changes made in the Center Axis dialog window will be displayed in the editor view without having to press the Execute button.

如果激活，在“中心轴”对话框窗口中所做的所有更改都将显示在编辑器视图中，而不必按“执行”按钮。

Editor Update

编辑更新

This option makes sure the object axis is updated for the Axis to option.

此选项确保对象轴被更新为 Axis to 选项。

Center Axis to
Center Object to
Center Parent to
Center to Parent
View Center

中轴指向中心对象指向中心父视图中心指向中心父视图中心

These commands reflect the commands just described above. If desired, hotkeys can be assigned to each of these commands.

这些命令反映了上面描述的命令。如果需要，热键可以分配给每个命令。