DXF Import/Export
DXF 进出口
Cinema 4D can interpret DXF files up to AutoCAD version 12 (or export filters from other applications that are 100% compatible – whereby the emphasis lies on 100%) and can also correctly interpret the following elements: SOLID, 3D FACE, LINE, POLYLINE, CIRCLE, ARC, POINT and TRACE. All three-dimensional data is read in accurately. All documented POLYLINE combinations as well as height and elevation data are supported. The same is true of element coordinate systems, layer names and various line thicknesses.
Cinema 4D 可以解释 DXF 文件直至 AutoCAD 版本12(或从其他应用程序中导出100% 兼容的过滤器——重点放在100% 上) ，也可以正确解释以下元素: SOLID，3D FACE，LINE，POLYLINE，CIRCLE，ARC，POINT 和 TRACE。所有三维数据都被准确地读入。支持所有记录的 POLYLINE 组合以及高度和高程数据。元素坐标系、层名和不同的线厚也是如此。
When importing DXF files, it is best not to import 2D/3D solids where possible. Instead, use the 3D Face entity. The reason why solids are best avoided is that they must be converted to polygons by Cinema 4D and the result is not always perfect and manual reworking of the mesh may be required. 在导入 DXF 文件时，最好尽可能不导入2D/3D 实体。相反，使用3D Face 实体。最好避免实体的原因是它们必须通过 Cinema 4D 转换为多边形，结果并不总是完美的，可能需要手动重新制作网格
DXF 导入/导出: DXF 导入
DXF 导入/导出: DXF 导出