Frames

框架

This menu contains options that let you jump to specific locations in the Timeline view, move the Timeline view to specific regions and more. All options work in either Dope Sheet mode or F-Curve mode.

此菜单包含允许您跳转到时间轴视图中的特定位置、将时间轴视图移动到特定区域等选项。所有选项工作在涂料表模式或 f 曲线模式。

Keys

钥匙

Go to Previous Key
Go to Next Key

转到上一个键转到下一个键

Use this option to make the Timeslider jump to the next or previous key/Motion Clip.

使用此选项可使 Timeslider 跳转到下一个或上一个按键/动作剪辑。

Go to First Key/Motion Clip
Go to Last Key/Motion Clip

转到第一个键/运动剪辑到最后一个键/运动剪辑

Use this option to make the Timeslider jump to the first or last key/Motion Clip.

使用此选项可使 Timeslider 跳转到第一个或最后一个按键/动作剪辑。

Frame Marker

框架标记

Go to Next Marker
Go to Previous Marker

转到下一个 MarkerGo 到上一个标记

Use this option to make the Timeslider jump to the next or previous Marker.

使用此选项可使“时间限制器”跳转到下一个或上一个标记。

Go to First Marker
Go to Last Marker

转到第一个 MarkerGo 到最后一个标记

Use this option to make the Timeslider jump to the first or last marker.

使用此选项可使 Timeslider 跳转到第一个或最后一个标记。

Frame Marker

框架标记

Selecting this option will open a small dialog window in which a marker name can be entered, to which the Timeslider will then jump.

选择此选项将打开一个小对话框窗口，其中可以输入标记名称，然后 Timeslider 将跳转到该对话框。

When the cursor is placed over this option in the menu a list with all available Markers will be displayed. Select a Marker to which the Timeslider should be set. The Timeslider view will also be centered on that Marker.

当光标放置在菜单中的此选项上时，将显示一个包含所有可用标记的列表。选择一个标记，其中的时间利用程序应该设置。Timeslider 视图也将以该标记为中心。

Other Commands

其他指令

RELEASE 23

第23期

Auto Frame Mode

自动框架模式

This option is only designed to display individually selected Tracks or objects. The F-Curves or Tracks of each individual element will be displayed in the F-Curve view. Otherwise the current F-Curve view will remain unchanged.

此选项仅设计用于显示单独选定的轨道或对象。每个单独元素的 F-Curves 或 Tracks 将显示在 F-Curve 视图中。否则，当前的 f 曲线视图将保持不变。

Frame Selected

选择框架

Selecting this option will display all selected keys/Motion Clips in the Timeline view. If necessary, the Timeline view will be scaled so all keys can be displayed.

选择此选项将在时间轴视图中显示所有选定的键/运动剪辑。如果有必要，时间轴视图将缩放，以便所有键可以显示。

Frame All

全部框架

Selecting this option will display the entire animation. The Timeline view will be scaled accordingly, if necessary.

选择此选项将显示整个动画。时间轴视图将相应缩放，如果必要的。

Go to Current Frame

转到当前帧

Selecting this option will make the Timeline view jump to the location of the Timeslider. The Timeslider will then be centered in the Timeline view.

选择此选项将使时间轴视图跳转到时间利用程序的位置。时间列表将会在时间轴视图中居中。

Go to Start
Go to End

转到 StartGo to End

Selecting this option will make the Timeline view jump to the start or end of the document, as defined in the Project Settings menu (Attribute Manager: Mode/Project).

选择此选项将使时间轴视图跳转到文档的开始或结束，如“项目设置”菜单(属性管理器: 模式/项目)中所定义的那样。

Frame Project Settings

框架项目设置

Selecting this option will scale the Timeline view to make the entire project length visible (Attribute Manager: Mode/Project).

选择此选项将缩放时间轴视图，使整个项目长度可见(属性管理器: 模式/项目)。

Frame Preview Range

帧预览范围

Selecting this option will scale the Timeline view to make the entire preview range (as defined by the Powerslider) visible.

选择此选项将缩放时间轴视图，使整个预览范围(由 Powerslider 定义)可见。

Frame Range...

帧范围..。

Selecting this option will open a small dialog window in which you can define a temporal range to be displayed in the Timeline. The Timeline view will be scaled accordingly.

选择此选项将打开一个小对话框窗口，您可以在其中定义要在时间轴中显示的时间范围。时间轴视图将相应缩放。

RELEASE 23

第23期

Set Range to Markers

将范围设置为标记

If the Timeslider is located between 2 Markers, this command will set the preview range to precisely between these Markers. If the Timeslider is located in front of or behind the last Marker, the preview range or the preview range end will be set to the project start or project end, respectively.

如果时间控制器位于两个标记之间，则此命令将预览范围精确地设置在这两个标记之间。如果 Timeslider 位于最后一个标记的前面或后面，预览范围或预览范围结束将分别设置为项目开始或项目结束。

Go to Previous Range
Go to Next Range

进入上一个范围到下一个范围

With these commands you can switch the preview range, including the Timeslider, to the previous or next Marker. The respective preview range length will be aligned to the next following Marker. You will jump from one Marker to the next and the preview range will be adjusted automatically.

有了这些命令，您可以切换预览范围，包括时间利得，以前或下一个标记。相应的预览范围长度将与下一个标记对齐。您将跳转从一个标记到下一个和预览范围将自动调整。

You can subdivide the animation in any number of smaller portions using the Markers and easily jump to these using these commands. Since the Timeslider is included in the switch, you can switch between Markers while the animation is playing.

您可以使用标记将动画细分为任意数量的小部分，并使用这些命令轻松跳转到这些部分。由于开关中包含了时间限制器，您可以在动画播放时在标记之间进行切换。

Set Min Preview Range
Set Max Preview Range

设置最小预览范围最大预览范围

These two commands can be used to easily set the start and end of the preview range to the current frame (Timeslider’s position).

可以使用这两个命令轻松地将预览范围的开始和结束设置为当前帧(Timeslider 的位置)。